[sunil8667]

Do you mean load them into the machine?

Stevo

While trying to do the tool change the error message light is on so now i can run machine in manual mode but not in auto mode . needs procedure to recover the ATC .I mea to say that when i press NC/PC and press ladder .the ladder is not displayed .

[vladimir1409]

sunil8667

I sent you the manuals I have(on your email) for the victor there is a procedure to reference the ATC you will find in the manual, it should solve the problem with the error light.

if you don't have the (counter, keep relay, timer etc) parameters you wont be able to use the tool charger

[gbowne1]

Yeah I remember a friend of mine had one of these Victor's in his shop. It had missing parameters. Parameters were entered and the ATC still didnt work. I dont remeber if he sorted out the timers, relays, etc.

[alexfanuc]

Yeah I remember a friend of mine had one of these Victor's in his shop. It had missing parameters. Parameters were entered and the ATC still didnt work. I dont remeber if he sorted out the timers, relays, etc.

The ATC works when you have a macro program (9000 program)

[vladimir1409]

do you have this macro programs (9000), if you have please share with us.

[gbowne1]

Yeah, you have to have the 9000 program which has the entire M06 cycle programmed. But there are timers, keeprelays, counters which set up how the ATC operates and is timed for the PMC.

[vleisman]

Hello Guys

We have a V-Center 4
S/N: NK-1217

After not using the ATC for the last two years we are now trying to get it going again. We are a bit stuck not having any of the Keep relay or counter data.

Can anyone assist me in providing the info that we need.

We are in a bit of trouble after trying to do a tool change our Z axis and spindle are now inhibited and are unable to run any cycle example: (M03s200; or G0X0)

We suspect a keep relay or tool data that needs to be changed.
And someone decided that we do not need our manuals anymore and tossed it we need some assistance

Thank You
Vleisman
South Africa

[vd51]

hello vladimir

i have same problem with vcenter-4 ATC,please can you email me manuals that you have,i haven't any manuals,erroe led is on and atc don't work,thanks
and best regards.

[agering]

Hi vd51,
What parameters options you interest, please tell private message to me or your PM.

[vd51]

hi agering
i need keeprl,timer,counter,data #3 for fixing my atc and ref again that.
my email is [email protected]
thanks.

[jameel123]

sunil8667

I sent you the manuals I have(on your email) for the victor there is a procedure to reference the ATC you will find in the manual, it should solve the problem with the error light.

if you don't have the (counter, keep relay, timer etc) parameters you wont be able to use the tool charger

My Name is Jameel we had purchase Victor V Center 4 VMC six months before and we started the machine unfortunately we lost backup file from the machine how ever we loaded the backup file but techinical people are asking(counter, keep relay, timer ATC Programming) if you can help me out so that we can start our machine.

[zavateandu]

My Name is Jameel we had purchase Victor V Center 4 VMC six months before and we started the machine unfortunately we lost backup file from the machine how ever we loaded the backup file but techinical people are asking(counter, keep relay, timer ATC Programming) if you can help me out so that we can start our machine.

what is the serial number of machine?

[orbitzz]

Hi! i'm just like you guys. need of parameter list for my victor vcenter4. Just started it up and batteries dead, memory lost. That's sad. if some one can give me a list or point me in the right direction this would be really nice. Even if atc 9000 program is avalible i would be happy as a child. s/n 1334 from 1987 fanuc 10m-a sold in sweden