[RMARCH]

Hi,

I was wondering if anyone knows the value of a bridgeport interact 412 XY or Z Axis Drive Boards Mat NR. 050881-407401 ? These were used on Bridgeports with the TNC2500 control and probably others. I know these are hard to find so i was wondering. I picked one up from a friend of mine that has 3 total.

Thanks
Ray

[RMARCH]

Can someone help ?

[RMARCH]

I guess no one knows the value of these boards. Thanks

[camarogod98]

I would say aprox 400 each if they are used and still work.

[RMARCH]

Hi, Thanks for the reply. I thought they were worth more than that.

[RMARCH]

Can anyone else please help ? Thanks

[gus]

The real answer is whatever someone will pay. something in the 3 to 4 hundred range seems appropriate, but the market rules

[RMARCH]

Thanks gus,

I have been looking for one of these for 8 years as a spare, only in case some thing happened and this is the 1st one i have come across. I was told over the years from different people these are extremely hard to find or to find some one to fix them was almost impossible.
This board is not the Z15-1-240V Bosch board on the smaller series 1 type machines. I know these sell for 3-4 hundred bucks.

Happy New Year !!!
Ray

[Jurek]

I have 87 412 with 151 control. My bosch cards # are 050881-403303. Do you think they are same? I like have a spare. Jurek

[RMARCH]

I have 87 412 with 151 control. My bosch cards # are 050881-403303. Do you think they are same? I like have a spare. Jurek

Hi Jurek, The board i have has a few different numbers on it like
050881-406401-404303, 503401--406401-404303 & 052266-203401-201303. These numbers are on 3 different yellow tags.

I just checked with my friend with the boards and the 050881 is the same on all the boards but the number after is different so it must be a serial number or something else.

So i think they are the same.

Hope this helps
Ray

[Jurek]

Hi RMARCH!Are they working. Iwould like have a spare. Iam in New Mexico. Where are You located at. Perhaps we could compare them visually. Price. Thanks! Jurek

[hectorbach]

Hi Jurek, The board i have has a few different numbers on it like
050881-406401-404303, 503401--406401-404303 & 052266-203401-201303. These numbers are on 3 different yellow tags.

I just checked with my friend with the boards and the 050881 is the same on all the boards but the number after is different so it must be a serial number or something else.

So i think they are the same.

Hope this helps
Ray

Hi Rmarch, I have three Bosch cards with different numbers, I'd like to buy a new one and send to repair one of those, do you have info of who can sell or repair those cards. 050881-406401-404303 and 050881-407401-403303, please advise

[hectorbach]

Hi RMARCH!Are they working. Iwould like have a spare. Iam in New Mexico. Where are You located at. Perhaps we could compare them visually. Price. Thanks! Jurek

Hi Jurek, did you find the solution for your Bosch cards..? I have three same cards, I need to repair and buy a new one, do you have a supplier to repair or to buy a new one..? please advise. Thanks

[hectorbach]

Jurek..! is it possible to find a new one Bosch card or those are obsolete..?

[RMARCH]

Jurek..! is it possible to find a new one Bosch card or those are obsolete..?

Hi Jurek , I know this post is almost 2 years old but These Bosch boards are Obsolete and hard to find. I have heard that no one has been able to find anyone who can fix them, even Bosch.

[Aggie Engineer]

For what it's worth, I have three Bosch servo drives that are sitting in a
box. Came from a 1987 series 2 interact 2 with SEM dc brushed MT30R4-58
motors. Ran the motors smoothly before I decided to remove the TNC151
controller and retro fit with Mach3 & Smoothstepper. I could easily be
persuaded to part with them and the TNC151 if anyone needs them.
Regards, Gerald

[Aggie Engineer]

Last nite, I pulled out one of the servo amps to get numbers. It has a
data plate attached to the chassis. On the data plate: Typ Z15-1-240V,
S-Nr. 355605, below that: 035883-111. I believe the yellow stickers on
the components are part number stickers for the individual boards. If there
is any interest, I will try to post pics.
Regards, Gerald

[amberg47]

i need bosch 052266 axis drive card

[WILDMAN2]

Man I have all the drive cards for a Boss5 and a control panel I need to unload But they don't have that # on any of them

[RMARCH]

[QUOTE=amberg47;1855806]i need bosch 052266 axis drive card[/QU

The 052266 number is the smaller board that mounts on Bosch board number 050881-406401 / 404303 correct ?