I have a nema 17 17hs19-2004s1 which is making a high pitched noise when power supply is turned on and does not respond to any code. am using an Arduino uno and dm542t driver. Motor was working and but then quit working. any one have this issue before?
17hs19-2004s1 Specifications:
https://www.oyostepper.com/goods-50-...Connector.html
DM542T Specifications?
https://www.oyostepper.com/goods-111...per-Motor.html
Thread: Nema 17 noise problem
Results 1 to 2 of 2
-
10-20-2023, 03:01 AM #1
Member
- Join Date
- Dec 2019
- Posts
- 4
Nema 17 noise problem
-
10-20-2023, 03:09 AM #2
Registered
- Join Date
- Aug 2005
- Posts
- 1101
Re: Nema 17 noise problem
It’s extremely unlikely that it is the motor.
It is more likely to be the driver, power supply, mechanical binding in the axis, or you are trying to drive the motor beyond faster its capabilities.
I’ve personally never seen a stepper motor fail.
Cheers
Peter
Sent from my iPhone using Tapatalk Pro-------------------------------------------------
Homann Designs - http://www.homanndesigns.com/store
Reply With QuoteSimilar Threads
-
NEMA 17 Stepper Motor making noise when idle
By Esmithiii in forum Stepper Motors / DrivesReplies: 2Last Post: 03-03-2017, 05:26 PM -
Serious noise problem- help
By antoineg in forum Avid CNCReplies: 6Last Post: 11-21-2016, 06:03 PM -
my stepper motor NEMA 23 do not move but make a little noise
By envergure in forum Stepper Motors / DrivesReplies: 2Last Post: 05-16-2016, 05:40 AM -
Nema 23 problem
By 12Robin99 in forum Benchtop MachinesReplies: 1Last Post: 11-23-2014, 10:58 PM -
Limits/Noise problem
By RichardV48 in forum Mach MillReplies: 31Last Post: 07-08-2007, 11:02 AM
Tags for this Thread
Posting Permissions
