Well.

I looked more carefully at things on my 2V3E boss 10 machine... And on the right of the knee table there are 2 limit/home switches on my machine. One has 1 button in it and the other has 2.

The one with 2 was frozen down the one with 1 was also frozen down how ever I was able to free that one up. Had to dissassemble the switch with 2 so it would start moving. So that is all done and they shold work right.

So when powering up it comes to
>enable axis drives

I enable and can move the table and quil around.

But on the right it lists I think X and Y as not homed. Is there an easy way to start the home sequence? Only way I have been able to trigger it is when it happens to ask to be homed after power up but I have no idea why it sometimes askes to be homed after power up > Press Exicute to begin homing sequence

Vs it just powering up and going directly to >enable axis drives.