Why would Foamworks 3 work on my computer and Mach3 only arms the motors when the Estop is activated
Why would Foamworks 3 work on my computer and Mach3 only arms the motors when the Estop is activated
Not sure of your question?
Unless you mean the motors are only enabled when in e-stop, if so you have some logic backwards somewhere?
Al.
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Yep thats seems to be the problem
And look as much as I can I can't find it
It's going to be a simple mistake and I know I will kick my self when I find it
I don't know how your E-stop is implemented but it should be a hard wired circuit that informs Mach through an input that an e-stop has taken place.
And the stop output From Mach in turn should also enable the hard wired circuit.
Al.
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.