[gbowne1]

I just received several pallates of old Mitsubishi CNC boards stripped from old CNCs.

Most of the boards are labeled with a MCxxx part number. Many of them are MC3xx numbers but a few are MC4xx and MC6xx and MC7xx

Also a few of
LXxxx
FXxxx
QXxxx
QYxxx
PDxx
GXxx


A few contol units UF01A, B and C.
Also UF701A and B.

Anyone tell me which model(s) they are from?

There appears to be enough to build at least two complete systems. Next week I will receive more.

I think these are from the 300 series.

I can give board numbers

As far as I know ill end up with several hundred boards.

[Al_The_Man]

Looks like some from Mazak (Mitsubishi) CAM T2-T2 L2-L3 ?
Al.

[gbowne1]

Well, I took a chance downloaded the connection manuals to see lists of board numbers.

They're mostly from the 300 series Meldas.

Only a few from the 500 series.

MC301B
MC301D
MC303B
MC303D
MC323
MC011D
MC011C
MC111B
MC411B (Several versions of this)
MC437D
MC413 (several versions of this)
MC714
MC723
MC727
MC721
MC442
MC446
MC456
MC095
MC611
MC433
MC724
MC461
MC201D
MC616

Missing any?

[mazak-user]

Hi,

Meldas 335 ( used in Mazatrol T32 or M32 )

best regards
mazak-user

[gbowne1]

I was wondering if they may be mostly for the Meldas M3/M3x/3xx series.

The FX and QX boards look way different and look as though they are the 50/500 series or for the 0.

Im awaiting what more is coming which I also am hearing is several pallates of more boards and keyboards, drives, a few servos, crt/mdi. Seven of the units also say UFxxx and FCA or FCUA.

The seller is only keeping the Mitsubishi PLC and standard automating equipment, VFDs etc.and not keeping the Mitsubishi CNC stuff they buy in large lots.

Never used the Freqrol or the MDS-S drives with the SF or SFj types. What servos do I need to look for?

Aparently there is a complete dynapath too in the one lot coming.

I asked to have them keep shipping me all the Mitsubishi CNC stuff they get from now on.

[mazak-user]

Have you any FR-SFJ-2-7.5k

Gesendet von meinem PAP5000DUO mit Tapatalk

[gbowne1]

I will look and see if I do. I'm working on hooking up mine to the control.