[lgalla]

More reading

Question
: What will happen to my casting if I use a larger aggregate?
Answer:
Using a larger aggregate may cause more surface voids because air is entrapped under the irregular shapes of this material. There is also a larger volume of voids between larger aggregate pieces than smaller pieces. It is therefore recommended that a smaller aggregate be used or that a smaller
aggregate be mixed with the larger particles. The smaller aggregate will act as a "roller system" to assist in turning the larger pieces of aggregate during vibration. It is recommended to use aggregate that passes through a number 50, 100 or 200 sieve.
THIS question is about concrete casting.
Larry