Another way would be to get a NC and NO valve. Put the NO on the main line and the NC on the second line and wire them together. Then when relay command is sent it will shut off main line and turn on second line. I may go that route just to be safe. More crap to wear out though.
Brian
WOT Designs
Thread: Coolant manifolds
Results 1 to 8 of 8
Threaded View
-
01-28-2015, 02:56 PM #7
Registered
- Join Date
- Dec 2010
- Posts
- 1230
Re: Coolant manifolds
Reply With QuoteSimilar Threads
-
PRoduction of 4 large manifolds in Aluminium
By orolfsnes in forum RFQ (Request for Quote)Replies: 0Last Post: 01-26-2015, 05:56 PM -
How to drill a hole using through coolant and using outside coolant on boring machine
By SatishNaik in forum News AnnouncementsReplies: 0Last Post: 12-26-2013, 04:26 PM -
Cleaning internal burrs on manifolds
By CORBIN92087 in forum MetalWork DiscussionReplies: 3Last Post: 07-28-2011, 03:27 PM -
To cut with oil or coolant?
By juanvaldez in forum MetalWork DiscussionReplies: 8Last Post: 10-13-2010, 02:17 PM -
Coolant or No Coolant when turning....
By Crashmaster in forum MetalWork DiscussionReplies: 3Last Post: 05-20-2007, 07:20 AM
Tags for this Thread
Posting Permissions
