Looking at machines and doing research, I'd like to be able to cut out flanges made of aluminum up to 1/2" at the thickest. I would imagine structural rigidity will have to be pretty high on the priority list. Should I be looking at CNC Routers?
Results 1 to 9 of 9
Threaded View
-
10-15-2013, 04:39 AM #1
Registered
- Join Date
- Sep 2013
- Posts
- 3
Am I in the ballpark? 1/2" aluminum
Reply With QuoteSimilar Threads
-
Newb. Best way to make 1-1/8" hole inside a 1.5" round aluminum rod?
By shinyhalo in forum Mini LatheReplies: 7Last Post: 10-20-2013, 03:12 PM -
New "Variable Pitch" SC Endmills for Aluminum from Helical Solutions
By tiehen in forum News AnnouncementsReplies: 2Last Post: 05-01-2010, 01:41 PM -
Hardinge HLV - Ballpark
By bjinatj in forum Hardinge LathesReplies: 0Last Post: 09-23-2009, 03:43 PM -
RFQ: Small (3"x5"x1/2") part from dimensioned drawings in Aluminum or stainless
By octathorpe in forum Employment OpportunityReplies: 6Last Post: 06-24-2008, 01:14 AM -
Making brackets; bending 1/4" x 3" aluminum flat stock
By guru_florida in forum Bending, Forging, Extrusion...Replies: 1Last Post: 06-08-2008, 11:48 PM
Posting Permissions
