[Hamed]

Hi there
I've got a RZNC 0504 DSP controller, but everything is in Chinese and I cannot follow the menu to change the language !
I have downloaded the English Menu to the DSP by DSP 0501 Program , but I cannot change it from the Joystick's Menu ( cause I cannot read Chinese )
I will appreciate any help !

[SkipW]

Here is a youtube video that shows you how to change the DSP language.

[nomedia="http://www.youtube.com/watch?v=CG-xrCJ9Ab8"]YouTube - ‪How to change language to English on DSP control panel‬‏[/nomedia]

Hope it works for you.

[king9558]

Hi Hamed:
Since you have downloaded the English label and menu files, you can change the languag as following steps: when it shows when you supply power, then press "Delete"(DON’T GO HOME)--"Menu"(ENTER MENU)-"5" button twice(MOVE THE CURSOR TO THE 3RD ITEM)—“OK"(ENTER THE SETTING)--"OK"(LANGUAGE SETTING)--"5"--"OK" then it changes into English.
Because there are different version of English label and menu files, so when it changes into english, you need to have a check whether the files are right or not. if they are right, the showing message are right, otherwise, it shows unrecognized characters.
Good luck!
Alan

[Hamed]

Hi Hamed:
Since you have downloaded the English label and menu files, you can change the languag as following steps: when it shows when you supply power, then press "Delete"(DON’T GO HOME)--"Menu"(ENTER MENU)-"5" button twice(MOVE THE CURSOR TO THE 3RD ITEM)—“OK"(ENTER THE SETTING)--"OK"(LANGUAGE SETTING)--"5"--"OK" then it changes into English.
Because there are different version of English label and menu files, so when it changes into english, you need to have a check whether the files are right or not. if they are right, the showing message are right, otherwise, it shows unrecognized characters.
Good luck!
Alan

thanks alan , I've tired it and it worked well !

[Hamed]

Here is a youtube video that shows you how to change the DSP language.

YouTube - ‪How to change language to English on DSP control panel‬‏

Hope it works for you.

Thanks alot SkipW, It worked!

[roctech]

Hi there
I've got a RZNC 0504 DSP controller, but everything is in Chinese and I cannot follow the menu to change the language !
I have downloaded the English Menu to the DSP by DSP 0501 Program , but I cannot change it from the Joystick's Menu ( cause I cannot read Chinese )
I will appreciate any help !

hello Hamad,

you write me an email and I will send you a video for change DSP language from Chinese to English.

And one of our engineer will be in Terhran early July for machine training, you please feel free to contact us if you need any help

Best regards

Roctech
*************************************
CNC Router ATC|CNC cutting machines|CNC router machine Manufacturer-RocTech

[roctech]

hello Hamad,

you write me an email and I will send you a video for change DSP language from Chinese to English.

And one of our engineer will be in Terhran early July for machine training, you please feel free to contact us if you need any help

Best regards

Roctech
*************************************
CNC Router ATC|CNC cutting machines|CNC router machine Manufacturer-RocTech

Hi Hamad,

I am sorry, I didn't see you already settled the problem, but welcome to ask other questions.

Good luck

Roctech
******************************
CNC Router ATC|CNC cutting machines|CNC router machine Manufacturer-RocTech