[LTS]

HI, has anyone removed the FAPT side of the control from a Fanuc 10T control? I have a customer who wants to remove the FAPT and run the control as a 10TA. He has had multiple problems with FAPT and does not want to repair it. What would really help is if some one has a 10TA control with a 14"CRT. I could get the board numbers and software versions from that.
Thanks.

[jdeere4250]

Yes it can be done. What are the problems he is having?
To remove FAPT . Change NC soft ware ( chips on master board )
Keypad is different. numbers are in different locations.
I am not real sure about the display sw and mdi/crt pcb.

[LTS]

The problem I have is a "Hardware Missmatch". I have changed the system software to 1212 which is for the 10TA with14"CRT. I have removed the FAPT board. I am not sure if the CRT/MDI unit is the problem or not.

[LTS]

Does anyone have a machine running with a 10TA control and a 14"CRT with analog drives? If so I'd like some info from the control data sheets.
Thanks

[jagger]

Hi can anybody help?

I am in the process of helping to set up a second hand lathe for a neighbour of mine, It has a fanuc 10t control with FAPT I am familar with the control but I need to know the figures for the different types of tool when it comes to definitions of machining i.e
CENTER DRILL
DRILLING
ROUGHING OF OUTER FIGURE
FINISHING OF OUTER
ROUGHING OF INNER FIGURE
FINISHING OF INNER FIGURE
GROOVING
THREADING
ETC

can anybody help?

[lambo88]

I have 4 machines with 10tf controls. They work great. I have 1 3tf control also.