hello everyone, i need help in my sliding mechanism project...
actually i am going to made one slider mechanism for one machine. Torque require for that is around 10KG. so i select stepper motor for turning shaft. and specification of that motor is...(SANYO DENKI MODEL NO. 103H7123-8653, 2.5A DC, 1.8 DEG/ STEP). i am going to control this stepper motor using ATMEGA8 micro controller ,due to motor higher current rating i am not sure that which type of driver i need for this type application.
please send me link if you find any circuit for that or any particular IC for this application...
Results 1 to 3 of 3
-
06-24-2013, 08:22 PM #1
Registered
- Join Date
- Jun 2013
- Posts
- 1
Need help for stepper motor driver for 2.4AMP and 1.8 deg/step motor...!!
-
06-24-2013, 08:32 PM #2
Registered
- Join Date
- Sep 2007
- Posts
- 13
I would use one of these http://www.leadshine.com/UploadFile/Down/M542d.pdf
-
06-25-2013, 06:47 PM #3
Registered
- Join Date
- May 2005
- Posts
- 1397
The Massmind THB6064AH would do nicely. I'm biased of course...
James hosts the single best wiki page about steppers for CNC hobbyists on the net:
http://www.piclist.com/techref/io/steppers.htm Disagree? Tell him what's missing! ,o)
Reply With QuoteSimilar Threads
-
UIROBOT:stepper motor,linear stepper motor and stepper driver Yahoo Group
By uirobot in forum Community Club HouseReplies: 0Last Post: 02-26-2013, 08:37 AM -
Integrated stepper motor? with built-in stepper motor driver
By uirobot in forum News AnnouncementsReplies: 0Last Post: 06-07-2010, 09:59 AM -
step driver 5A and step motor 6.4A
By gorantec in forum Stepper Motors / DrivesReplies: 5Last Post: 02-13-2009, 01:20 PM -
servos motor controled by stepper motor driver?
By mike10 in forum Servo Motors / DrivesReplies: 1Last Post: 01-04-2005, 12:05 AM
Posting Permissions
