While waiting for parts to arrive from CNCRP I've decided to start on my stand. I ordered a Pro series. Can someone measure from the bottom of the base railing (essentially the bottom of the machine) to the top of the stepper motor on an 8 inch Z axis at its highest point? I need to know the maximum height footprint. I already know the length and width footprint from the website.
Thanks! Scott
Thread: Need height measurement
Results 1 to 3 of 3
-
12-18-2013, 08:28 PM #1
Registered
- Join Date
- Mar 2011
- Posts
- 61
Need height measurement
-
12-18-2013, 08:48 PM #2
Registered
- Join Date
- Jun 2013
- Posts
- 88
Hi Scott,
The height from the bottom of the machine bed to the motor of the 8" Ballscrew Z is 36". If you add a cable track kit it is 43" from the machine bed to the cable track on the Z axis.
Best regards,
Cory
-
12-18-2013, 11:58 PM #3
Registered
- Join Date
- Mar 2011
- Posts
- 61
That'll work. Though higher than I thought. Thanks.
Reply With QuoteSimilar Threads
-
Tool Measurement
By afrodyzjak84 in forum SIEMENS -> GENERALReplies: 4Last Post: 10-29-2012, 08:44 PM -
Tool Measurement B
By oldgoat in forum FanucReplies: 14Last Post: 08-31-2011, 07:44 AM -
G0602 Measurement
By michaelthomas in forum Benchtop MachinesReplies: 5Last Post: 04-26-2011, 03:47 AM -
FLA100 Kit Height Measurement
By eaglezsoar in forum DIY CNC Router Table MachinesReplies: 0Last Post: 08-14-2010, 12:02 PM -
0.01 mm Tool Measurement
By Leha_Blin in forum CNC (Mill / Lathe) Control Software (NC)Replies: 2Last Post: 10-09-2009, 06:04 AM
Posting Permissions
