Can someone please post a copy of a good program for the acramatic 2100 controller. So I can edit my post processor with. With beginning headers, drill cycles and end of program code so it goes back to the top when the program is finished.
Can someone please post a copy of a good program for the acramatic 2100 controller. So I can edit my post processor with. With beginning headers, drill cycles and end of program code so it goes back to the top when the program is finished.
Hope this helps..
:
G90G45
G00X0Y0Z3.H1
N1 ;(PROGRAM = C3.HMI)
;(PROGRAM BY = COOP )
;(DATE = 4/4/2012)
;(TIME = 9:6)
;(TOOLPATH TYPE = DRILL = 1)
;(COMMENT = No Text)
N2
M6T20
;(TOOL_NAME = CD)
S1500M03
M08
;(CYCLE 1 - SPOT DRILL )
G81 X.5906Y-.3937Z1.0711R1.2811W0.0F5.
G80
M01
;(TOOLPATH TYPE = DRILL = 2)
;(COMMENT = )
N3
M6T19
;(TOOL_NAME = 23/64)
S1000M03
M08
;(CYCLE 2 - HIGH SPEED PECK)
G83 X.5906Y-.3937K.1Z-.1689R1.2811J11W0.0F4.5
G80
M01
;(TOOLPATH TYPE = PROFILE = 3)
;(COMMENT = )
N4
M6T17
;(TOOL_NAME = CHAMFER)
S3500M03
G00X.5906Y-.3937Z3.
X.3406Y.325
Z1.1711
G01Z1.1211F10.5
Y.3125F35.
G03X.5906Y.0625I.25J0.
G01X1.1561
G02X1.2003Y.0442I0.J-.0625
G01X1.2253Y.0192
G02X1.2436Y-.025I-.0442J-.0442
G01Y-.7564
G02X1.2253Y-.8006I-.0625J0.
G01X1.2003Y-.8256
G02X1.1561Y-.8439I-.0442J.0442
N5 G01X.025
G02X-.0192Y-.8256I0.J.0625
G01X-.0442Y-.8006
G02X-.0625Y-.7564I.0442J.0442
G01Y-.025
G02X-.0442Y.0192I.0625J0.
G01X-.0192Y.0442
G02X.025Y.0625I.0442J-.0442
G01X.5906
G03X.8406Y.3125I0.J.25
G01Y.325
G00Z3.
M01
G00Z3.
G00X0Y0G46
M02
For some reason the m02 isnt working and at the end of every program it disapperas and I have to re-load it everytime. Its geting really annoying.
Turn Multi-Setup off to get the program to stay put. When that is on, the machine is expecting to switch to another set-up, which would normally use a different program.
What CAM software are you using, I may be able to help you out if it's Mastercam.
Rgds,
John B
I have mastercam and bobcad. I couldnt get mastercam to spit out a program that would work with these machines. i dont have much experience with mastercam. But bobcad had a decent post processor but Im spending about a half hour manually editing every program. We make extremely complicated one of a kind here and this is eating my time up.
PM me your email address, I have a Mastercam X post that will work fine