Hey guys, our shop is looking at purchasing a Puma 12-s, mid 90's machine with the Mits 520L Control. I've hear the control is less desired than the Fanuc but are there any major issues commonly known with the Daewoo Puma 12-S or the control to watch out or look for? We are not a production shop, mainly short runs. Thanks for any info.
Results 1 to 3 of 3
-
12-01-2008, 04:28 PM #1
Registered
- Join Date
- Feb 2008
- Posts
- 2
Looking to purchase a Daewoo Puma 12-S
-
12-23-2008, 10:49 PM #2
Registered
- Join Date
- Oct 2008
- Posts
- 25
We had a 12S for many years. It had the FAPT Fanuc control. Initially, there was a major issue with the gearbox. No oil channels to lube the bearings. We got a re-built gearbox and low and behold there were oil channels in it. Other than that the machine was mechanically solid. The Fanuc side did give us some grief tho.
-
01-20-2009, 03:35 AM #3
Registered
- Join Date
- Jul 2005
- Posts
- 42
we have two puma250 with mits control.had issues with spindle drives at first
everything seems to be ok. we are quite happy with them
Reply With QuoteSimilar Threads
-
Daewoo Puma 6 with 3tf
By mmxmb in forum Daewoo/DoosanReplies: 1Last Post: 04-06-2011, 01:36 PM -
Daewoo puma 8s
By mroy0404 in forum Daewoo/DoosanReplies: 3Last Post: 06-14-2010, 07:58 AM -
I Need to buy a Daewoo Puma 8
By gcrudgington in forum Daewoo/DoosanReplies: 2Last Post: 10-20-2008, 11:24 PM -
Daewoo Puma 700 LM lathe
By Norboy in forum Daewoo/DoosanReplies: 0Last Post: 07-10-2008, 06:35 PM -
Daewoo Puma 200
By williamsxu in forum Daewoo/DoosanReplies: 10Last Post: 01-17-2007, 11:52 PM
Posting Permissions
