Hi guys i have bought longs motors from ebay and they are great, the problem i am having is the motors are very hot to the touch and to me this does not seem normal, the motors run fine and do what they are ment to so is there some way they could be wired wrong. Thanks for any help.
Thread: Longs Motors Running Hot
Results 1 to 2 of 2
-
07-02-2013, 07:25 PM #1
Registered
- Join Date
- Apr 2013
- Posts
- 5
Longs Motors Running Hot
-
07-02-2013, 07:46 PM #2
Community Moderator
- Join Date
- Dec 2003
- Posts
- 24219
If they are steppers they will, the wattage dissipated will be equal to the label voltage x rated current.
If servo's, normally no, they should run fairly cool, even when used over a long period.
Al.CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Reply With Quote
Similar Threads
-
Has anyone bought from Changzhou Longs-Motor?
By MrArmyAnt in forum Waterjet General TopicsReplies: 29Last Post: 10-06-2018, 09:40 PM -
RESOLVED! Mach3 MaxNC enabled = 1/4 speed motors , Disabled = no running motors.
By BIWVince in forum Mach Software (ArtSoft software)Replies: 1Last Post: 02-22-2013, 09:28 PM -
Help with 878oz Kit from Longs Motor?
By allengambrell in forum Stepper Motors / DrivesReplies: 10Last Post: 03-27-2012, 04:16 AM -
3 of 4 motors not running...
By mw29715 in forum Uncategorised MetalWorking MachinesReplies: 6Last Post: 06-03-2011, 02:34 AM -
Motors not running slow
By rich_cree in forum Mach MillReplies: 0Last Post: 02-17-2009, 12:20 AM
Posting Permissions
