I was working on a Miyano turning center today and was able to save the CNC parameters but I could not figure out how to save off the PMC and PMM parameters. This was on a Fanuc 18i-T with what I believe is using dual processors. Anyone have experience doing this.
Thanks
Dan
Thread: how to save parameters on 18i-T
Results 1 to 3 of 3
-
09-10-2007, 10:47 PM #1
Registered
- Join Date
- Oct 2005
- Posts
- 7
how to save parameters on 18i-T
-
09-12-2007, 02:23 PM #2
Registered
- Join Date
- Jan 2007
- Posts
- 333
how to save parameters on 18i-T
Here's PMC I think
PMM you softkey through [SYSTEM] to get to "SELECT ACTIVE SLAVE" and select. Then softkey to [PUNCH]
(may need memory card depending on MD1 and MD2)
NOTE: When parameter 8760 is set to 8000
The program number for group n is 8000 + n*10.
The group number n is indicated in the title area of each slave.
File is saved with extension PMM
-
09-13-2007, 02:24 AM #3
Registered
- Join Date
- Oct 2005
- Posts
- 7
Thanks for the info!
Dan
Reply With QuoteSimilar Threads
-
How Do I Save As .JPG, .TIF or .BMP?
By TZ250 in forum Dolphin CAD/CAMReplies: 1Last Post: 06-02-2007, 03:17 PM -
How do you save TNC machine parameters to a PC?
By swarf_rat in forum Bridgeport / Hardinge MillsReplies: 1Last Post: 04-21-2007, 09:49 AM -
HAAS save all
By gar in forum Haas MillsReplies: 3Last Post: 09-08-2006, 01:21 AM -
Why do my programs look like this when I save them???
By carbidecraters in forum BobCad-CamReplies: 30Last Post: 08-09-2006, 06:41 AM -
Can v9 save geometry as a .dxf or .dwg?
By badRandle in forum MastercamReplies: 2Last Post: 06-03-2003, 07:33 PM
Posting Permissions
