Hello, I purchased an older fadal (early 90's model) that has a CNC88 controller. We have made several tapes after purchasing DNC software to cross-load. The tapes load just fine but each time we keep hitting an error. Our manual is somewhat unclear on operational basics. If someone has time can you provide instructions of how you set your machine up after cold start. What we need to know is exactly how you set your cutting tools, and the axes. Also, if you have an idea of what the beginning of the tape is supposed to look like it would help us to set our post-processor. We have adjusted it many times to no avail. Thank you in advance for your assistance.