[blackdoglaser]

Hope someone can help.
I have loaded the gecko 540 xml file and gone through and set up all the limit switches. When I hit the home button it homes perfectly, I can move the spindle to a certain point and zero everything and thats fine, but when I load my gcode from aspire all seems normal till I hit start and it sends the machine crashing into the ends of there travel, and the limit switches don't seem to stop it. It seems to go in different directions with the same gcode. So far it has taken aim at every corner of the machine before I hit stop.
Thanks

[unknownpro]

I don't know much about aspire, but when I am using my current program if I don't set the starting point (Machining Origin) then the cutter heads to where I have drawn the part.

let me see if I can explain the better. lets say you have a part that is centered at X1,Y1 but your cutter is at 0,0 whenever you hit "start" the cutter is going to move to 1,1 to the location of where you part is.

you need to specify in your program that the center of your piece is 1,1 because your cutter is at 0,0. or move your drawing to where is centered at 0,0 and then you will always start in the right place when cutting.

please understand I am only using simple number to explain this.

[mactec54]

blackdoglaser

Similar to the above post, Your part 0.0 must match where you have placed your machine X0Y0. points

Usually in your drawing you place the X0Y0. position either top left hand corner or the bottom left hand corner, of cause it can be anywhere on the part, but you have to know were

So when you place your work on your machine, you then move/set the machines X & Y Axes where ever you have your drawn part X0 Y0. this then becomes your G54 machine offset position

[blackdoglaser]

I don't know much about aspire, but when I am using my current program if I don't set the starting point (Machining Origin) then the cutter heads to where I have drawn the part.

let me see if I can explain the better. lets say you have a part that is centered at X1,Y1 but your cutter is at 0,0 whenever you hit "start" the cutter is going to move to 1,1 to the location of where you part is.

you need to specify in your program that the center of your piece is 1,1 because your cutter is at 0,0. or move your drawing to where is centered at 0,0 and then you will always start in the right place when cutting.

please understand I am only using simple number to explain this.


I have set the starting point by moving the cutter to the centre of the workpiece and zeroing all the axis. When I move off that point and hit zero it returns to where I set it. I can move it to home position and it will still go back to my chosen zero zero point but when I hit start it takes off at speed into one corner of the machine.

[blackdoglaser]

I have got that part sorted I believe. It takes off at speed to a random place on the machine when I hit go. It doesn't go to home position and it doesn't stop when it gets to the end of the travel.

[mactec54]

I have got that part sorted I believe. It takes off at speed to a random place on the machine when I hit go. It doesn't go to home position and it doesn't stop when it gets to the end of the travel.

Post the G-code Program, and we will see what is happening, you can paste it in a post or save it as text and attach it

[blackdoglaser]

Is this what you needed?
I just tried running it again. I homed the machine perfectly to the left front then moved the cutter to the centre of my workpeice and zero'ed all the axis'. As soon as I hit start the spindle goes straight to the top and triggers the z limit switch. When I press start again it went at speed towards the left rear of the machine and would have crashed if I had not stopped it.
I can't figure out if it's an issue with the gcode or something to do with mach3 settings.


( test )
( File created: Tuesday February 16 2016 - 06:58 PM)
( for Mach2/3 from Vectric )
( Material Size)
( X= 285.000, Y= 210.000, Z= 18.000)
()
(Toolpaths used in this file
(V-Carve 1)
(Tools used in this file: )
(1 = V-Bit {60 deg 25.3 mm} )
N100G00G21G17G90G40G49G80
N110G71G91.1
N120T1M06
N130 (V-Bit {60 deg 25.3 mm} )
N140G00G43Z20.000H1
N150S20000M03
N160(Toolpath:- V-Carve 1)
N170()
N180G94
N190X0.000Y0.000F2000.0
N200G00X-16.885Y23.592Z3.000
N210G1Z-6.000F1000.0
N220G1X-16.828Y23.681F2000.0
N230G1X-16.399Y24.048Z-5.691
N240G1X-15.880Y24.532Z-5.251
N250G1X-15.618Y24.796Z-5.000
N260G1X-16.140Y24.283Z-5.481
N270G1X-16.656Y23.824Z-5.883
N280G1X-16.828Y23.681Z-6.000
N290G1X-17.238Y23.514
N300G1X-17.714Y23.944Z-5.000
N310G1X-17.238Y23.514Z-6.000
N320G1X-17.295Y23.320
N330G1X-17.504Y22.805
N340G1X-17.744Y22.469Z-5.897
N350G1X-18.027Y22.135Z-5.811
N360G1X-18.373Y21.798Z-5.752
N370G1X-18.642Y21.582Z-5.725
N380G1X-18.975Y21.352Z-5.740
N390G1X-19.330Y21.157Z-5.778
N400G1X-19.726Y20.974Z-5.861
N410G1X-20.295Y20.764Z-6.000
N420G1X-20.748Y20.687
N430G1X-21.394Y20.609
N440G1X-22.119Y20.550
N450G1X-22.926Y20.507
N460G1X-24.782Y20.474
N470G1X-31.248Y20.464
N480G1X-32.287Y20.392
N490G1X-33.275Y20.249
N500G1X-34.213Y20.034
N510G1X-34.663Y19.900
N520G1X-35.101Y19.749
N530G1X-35.527Y19.580
N540G1X-36.282Y19.221
N550G1X-36.758Y19.010Z-5.917
N560G1X-37.158Y18.798Z-5.857
N570G1X-37.549Y18.555Z-5.814
N580G1X-37.944Y18.263Z-5.795
N590G1X-38.305Y17.944Z-5.807
N600G1X-38.635Y17.595Z-5.851
N610G1X-38.937Y17.212Z-5.927
N620G1X-39.119Y16.940Z-6.000
N630G1X-39.367Y16.629
N640G1X-39.620Y16.279
N650G1X-39.855Y15.916
N660G1X-40.073Y15.540
N670G1X-40.273Y15.152
N680G1X-40.456Y14.750
N690G1X-40.622Y14.335
N700G1X-40.771Y13.906
N710G1X-40.984Y13.136
N720G1X-41.417Y12.594Z-5.465
N730G1X-41.763Y12.135Z-5.000
N740G1X-41.078Y13.022Z-5.890
N750G1X-40.984Y13.136Z-6.000
N760G1X-39.487Y13.834
N770G1X-38.857Y13.491Z-5.000
N780G1X-39.487Y13.834Z-6.000
N790G1X-39.526Y14.116
N800G1X-39.561Y14.730
N810G1X-39.537Y15.298
N820G1X-39.467Y15.834
N830G1X-39.348Y16.341
N840G1X-39.179Y16.819
N850G1X-39.100Y16.970Z-5.993
N860G1X-38.849Y17.330Z-5.906
N870G1X-38.567Y17.672Z-5.842
N880G1X-38.254Y17.993Z-5.805
N890G1X-37.900Y18.298Z-5.796
N900G1X-37.505Y18.585Z-5.817
N910G1X-37.072Y18.847Z-5.865
N920G1X-36.600Y19.085Z-5.938
N930G1X-36.282Y19.221Z-6.000
N940G1X-36.104Y19.276
N950G1X-35.535Y19.402
N960G1X-34.929Y19.490
N970G1X-34.285Y19.543
N980G1X-33.610Y19.560
N990G1X-30.067
N1000G2X-29.501Y18.870I0.000J-0.577
N1010G1X-31.888Y6.879
N1020G1X-32.230Y5.505
N1030G1X-32.408Y4.911
N1040G1X-32.593Y4.379
N1050G1X-32.784Y3.906
N1060G1X-33.013Y3.446
N1070G1X-33.282Y3.151Z-5.869
N1080G1X-33.563Y2.883Z-5.773
N1090G1X-33.854Y2.647Z-5.712
N1100G1X-34.029Y2.522Z-5.701
N1110G1X-34.146Y2.417Z-5.731
N1120G1X-34.275Y2.260Z-5.857
N1130G1X-34.356Y2.120Z-6.000
N1140G1X-34.745Y1.960
N1150G1X-35.136Y1.856
N1160G1X-35.547Y1.795
N1170G1X-35.969Y1.776
N1180G1X-36.527Y1.783
N1190G1X-36.815Y1.804
N1200G1X-36.998Y2.437Z-5.000
N1210G1X-36.815Y1.804Z-6.000
N1220G1X-37.726Y0.893
N1230G1X-39.066Y0.369Z-5.000
N1240G1X-37.726Y0.893Z-6.000
N1250G1X-30.573Y0.607
N1260G1X-30.333Y0.020Z-5.000
N1270G1X-30.573Y0.607Z-6.000
N1280G1X-29.699Y1.537
N1290G1X-28.390Y2.088Z-5.000
N1300G1X-29.699Y1.537Z-6.000
N1310G1X-33.796Y1.622
N1320G2X-34.356Y2.120I0.012J0.577
N1330G1X-34.275Y2.260Z-5.857
N1340G1X-34.146Y2.417Z-5.731
N1350G1X-34.029Y2.522Z-5.701
N1360G1X-33.810Y2.681Z-5.719
N1370G1X-33.519Y2.921Z-5.787
N1380G1X-33.240Y3.194Z-5.887
N1390G1X-33.013Y3.446Z-6.000
N1400G1X-32.690Y3.701
N1410G1X-32.296Y4.043
N1420G1X-31.939Y4.386
N1430G1X-31.618Y4.730
N1440G1X-31.334Y5.075
N1450G1X-31.085Y5.420
N1460G1X-30.860Y5.784
N1470G1X-30.647Y6.184
N1480G1X-30.446Y6.620
N1490G1X-30.258Y7.094
N1500G1X-30.083Y7.604
N1510G1X-29.921Y8.151
N1520G1X-29.774Y8.734
N1530G1X-27.699Y19.096
N1540G2X-27.132Y19.560I0.566J-0.113
N1550G1X-25.743
N1560G1X-24.893Y19.584
N1570G1X-24.076Y19.657
N1580G1X-23.284Y19.777
N1590G1X-22.516Y19.944
N1600G1X-21.772Y20.160
N1610G1X-21.052Y20.422
N1620G1X-20.295Y20.764
N1630G1X-19.634Y21.013Z-5.845
N1640G1X-19.279Y21.183Z-5.770
N1650G1X-18.924Y21.384Z-5.735
N1660G1X-18.596Y21.617Z-5.727
N1670G1X-18.283Y21.879Z-5.760
N1680G1X-17.988Y22.178Z-5.821
N1690G1X-17.675Y22.560Z-5.927
N1700G1X-17.480Y22.830Z-6.000
N1710G1X-17.070Y23.331
N1720G1X-16.885Y23.592
N1730G00Z3.000
N1740G00X-5.187Y1.715
N1750G1Z-6.000F1000.0
N1760G1X-5.009Y1.865F2000.0
N1770G1X-4.564Y2.142Z-5.873
N1780G1X-4.172Y2.422Z-5.754
N1790G1X-3.992Y2.561Z-5.713
N1800G1X-3.614Y2.353Z-5.000
N1810G1X-3.992Y2.561Z-5.713
N1820G1X-3.749Y2.912Z-5.419
N1830G1X-3.390Y3.471Z-5.000
N1840G1X-3.760Y2.896Z-5.432
N1850G1X-3.992Y2.561Z-5.713
N1860G1X-4.200Y2.402Z-5.762
N1870G1X-4.719Y2.040Z-5.910
N1880G1X-5.009Y1.865Z-6.000
N1890G1X-5.250Y1.765
N1900G1X-5.835Y1.580
N1910G1X-6.432Y1.448
N1920G1X-7.037Y1.369
N1930G1X-7.648Y1.342
N1940G1X-9.139Y1.385
N1950G1X-15.850Y1.650
N1960G2X-16.403Y2.266I0.023J0.577
N1970G1X-16.300Y2.399Z-5.872
N1980G1X-16.135Y2.548Z-5.769
N1990G1X-15.770Y2.801Z-5.763
N2000G1X-15.478Y3.041Z-5.813
N2010G1X-15.201Y3.314Z-5.907
N2020G1X-15.007Y3.534Z-6.000
N2030G1X-14.313Y4.122
N2040G1X-13.952Y4.471
N2050G1X-13.629Y4.817
N2060G1X-13.346Y5.160
N2070G1X-13.099Y5.500
N2080G1X-12.878Y5.855
N2090G1X-12.669Y6.245
N2100G1X-12.473Y6.669
N2110G1X-12.290Y7.128
N2120G1X-12.121Y7.622
N2130G1X-11.966Y8.151
N2140G1X-11.825Y8.714
N2150G1X-11.405Y10.820
N2160G1X-10.963Y11.274
N2170G1X-10.838Y11.248Z-5.932
N2180G1X-10.629Y11.227Z-5.896
N2190G1X-10.121Y11.227Z-5.896
N2200G1X-9.398Y11.214Z-5.919
N2210G1X-8.271Y11.167Z-6.000
N2220G1X-6.033Y10.913
N2230G1X-5.822Y10.305Z-5.000
N2240G1X-6.033Y10.913Z-6.000
N2250G1X-5.781Y11.167
N2260G1X-4.396Y11.744Z-5.000
N2270G1X-5.781Y11.167Z-6.000
N2280G1X-8.271
N2290G1X-9.421Y11.214Z-5.918
N2300G1X-10.140Y11.227Z-5.896
N2310G1X-10.629
N2320G1X-10.838Y11.248Z-5.932
N2330G1X-10.963Y11.274Z-6.000
N2340G1X-11.195Y11.855
N2350G1X-9.574Y20.128
N2360G1X-9.367Y20.469
N2370G1X-9.264Y20.500Z-5.947
N2380G1X-9.008Y20.533Z-5.895
N2390G1X-7.009Y20.520Z-5.919
N2400G1X-5.692Y20.480Z-5.989
N2410G1X-5.136Y20.426Z-6.000
N2420G1X-4.631Y20.350
N2430G1X-4.182Y20.257
N2440G1X-3.786Y20.146
N2450G1X-3.432Y20.008
N2460G1X-3.110Y19.836
N2470G1X-2.822Y19.626
N2480G1X-2.575Y19.377
N2490G1X-2.377Y19.089
N2500G1X-2.236Y18.770
N2510G1X-2.153Y18.430
N2520G1X-2.147Y18.352
N2530G1X-2.185Y18.043Z-5.902
N2540G1X-2.275Y17.558Z-5.799
N2550G1X-2.817Y17.096Z-5.000
N2560G1X-2.275Y17.558Z-5.799
N2570G1X-1.937Y17.096Z-5.000
N2580G1X-2.275Y17.558Z-5.799
N2590G1X-2.175Y18.114Z-5.922
N2600G1X-2.147Y18.352Z-6.000
N2610G1X-1.480Y20.474
N2620G1X-0.693Y21.051Z-5.000
N2630G1X-1.480Y20.474Z-6.000
N2640G1X-5.577
N2650G1X-6.335Y20.504Z-5.947
N2660G1X-7.025Y20.521Z-5.918
N2670G1X-9.013Y20.533Z-5.895
N2680G1X-9.264Y20.500Z-5.947
N2690G1X-9.367Y20.469Z-6.000
N2700G1X-10.299Y20.443
N2710G1X-11.495Y20.358
N2720G1X-11.707Y20.415Z-5.865
N2730G1X-11.930Y20.425Z-5.805
N2740G1X-12.821Y20.344Z-5.740
N2750G1X-13.395Y20.261Z-5.710
N2760G1X-14.027Y20.131Z-5.697
N2770G1X-14.664Y19.957Z-5.710
N2780G1X-15.275Y19.743Z-5.747
N2790G1X-15.882Y19.477Z-5.813
N2800G1X-16.424Y19.183Z-5.889
N2810G1X-16.964Y18.828Z-5.990
N2820G1X-17.046Y18.775Z-6.000
N2830G1X-17.403Y18.547
N2840G1X-17.737Y18.305
N2850G1X-18.052Y18.048
N2860G1X-18.347Y17.775
N2870G1X-18.622Y17.487
N2880G1X-18.879Y17.184
N2890G1X-19.117Y16.864
N2900G1X-19.336Y16.528
N2910G1X-19.537Y16.175
N2920G1X-19.720Y15.806
N2930G1X-19.884Y15.419
N2940G1X-20.030Y15.014
N2950G1X-20.158Y14.591
N2960G1X-20.266Y14.150
N2970G1X-20.345Y13.749
N2980G1X-20.714Y13.249Z-5.499
N2990G1X-21.054Y12.764Z-5.000
N3000G1X-20.386Y13.696Z-5.948
N3010G1X-20.345Y13.749Z-6.000
N3020G1X-18.918Y14.441
N3030G1X-18.343Y14.078Z-5.000
N3040G1X-18.918Y14.441Z-6.000
N3050G1X-18.890Y15.047
N3060G1X-18.800Y15.675
N3070G1X-18.644Y16.290
N3080G1X-18.428Y16.870
N3090G1X-18.148Y17.417
N3100G1X-17.807Y17.932
N3110G1X-17.401Y18.416
N3120G1X-17.001Y18.801
N3130G1X-16.379Y19.209Z-5.883
N3140G1X-15.819Y19.507Z-5.803
N3150G1X-15.236Y19.758Z-5.744
N3160G1X-14.628Y19.969Z-5.708
N3170G1X-13.944Y20.150Z-5.700
N3180G1X-13.329Y20.272Z-5.710
N3190G1X-12.632Y20.367Z-5.746
N3200G1X-11.930Y20.425Z-5.805
N3210G1X-11.707Y20.415Z-5.865
N3220G1X-11.495Y20.358Z-6.000
N3230G1X-11.348Y19.848
N3240G1X-14.045Y6.357
N3250G1X-14.206Y5.690
N3260G1X-14.376Y5.085
N3270G1X-14.556Y4.541
N3280G1X-14.746Y4.056
N3290G1X-15.007Y3.534
N3300G1X-15.247Y3.267Z-5.888
N3310G1X-15.562Y2.968Z-5.797
N3320G1X-15.823Y2.762Z-5.759
N3330G1X-16.135Y2.548Z-5.769
N3340G1X-16.300Y2.399Z-5.872
N3350G1X-16.403Y2.266Z-6.000
N3360G1X-16.814Y2.117
N3370G1X-17.253Y2.008
N3380G1X-17.725Y1.932
N3390G1X-18.232Y1.887
N3400G1X-18.773Y1.873
N3410G1X-19.013Y2.450Z-5.000
N3420G1X-18.773Y1.873Z-6.000
N3430G1X-19.748Y0.892
N3440G1X-21.082Y0.369Z-5.000
N3450G1X-19.748Y0.892Z-6.000
N3460G1X-8.892Y0.443
N3470G1X-8.034Y0.438
N3480G1X-7.558Y0.505
N3490G1X-7.064Y0.642
N3500G1X-6.551Y0.853
N3510G1X-6.019Y1.139
N3520G1X-5.751Y1.308
N3530G1X-5.187Y1.715
N3540G00Z3.000
N3550G00X5.533Y19.407
N3560G1Z-6.000F1000.0
N3570G1X5.094Y19.028F2000.0
N3580G1X4.649Y18.571
N3590G1X4.272Y18.098
N3600G1X3.961Y17.611
N3610G1X3.714Y17.107
N3620G1X3.529Y16.584
N3630G1X3.406Y16.041
N3640G1X3.344Y15.474
N3650G1X3.344Y14.892
N3660G1X3.401Y14.372
N3670G1X3.511Y13.931
N3680G1X3.668Y13.565
N3690G1X3.894Y13.229
N3700G1X4.080Y13.007
N3710G1X4.633Y12.424
N3720G1X5.401Y11.691
N3730G1X8.359Y9.055
N3740G1X8.915Y8.537
N3750G1X9.407Y8.019
N3760G1X9.829Y7.505
N3770G1X10.182Y6.992
N3780G1X10.459Y6.487
N3790G1X10.669Y5.963
N3800G1X10.797Y5.444
N3810G1X10.830Y5.184
N3820G1X10.841Y4.924
N3830G1X10.819Y4.454
N3840G1X10.754Y3.999
N3850G1X10.644Y3.562
N3860G1X10.489Y3.144
N3870G1X10.289Y2.747
N3880G1X10.138Y2.517
N3890G1X9.826Y2.198Z-5.902
N3900G1X9.538Y1.945Z-5.834
N3910G1X9.237Y1.711Z-5.781
N3920G1X8.922Y1.497Z-5.740
N3930G1X8.585Y1.298Z-5.712
N3940G1X8.187Y1.101Z-5.700
N3950G1X7.772Y0.933Z-5.707
N3960G1X7.337Y0.791Z-5.732
N3970G1X6.797Y0.660Z-5.787
N3980G1X6.402Y0.590Z-5.833
N3990G1X5.904Y0.533Z-5.902
N4000G1X5.293Y0.503Z-6.000
N4010G1X4.809Y0.555
N4020G1X4.079Y0.696
N4030G1X3.357Y0.906
N4040G1X2.644Y1.184
N4050G1X2.286Y1.352
N4060G1X1.594Y1.729
N4070G1X0.907Y2.175
N4080G1X0.650Y2.369
N4090G1X0.593Y3.136Z-5.000
N4100G1X0.650Y2.369Z-6.000
N4110G1X-0.364Y1.333
N4120G1X-1.350Y1.152Z-5.000
N4130G1X-0.364Y1.333Z-6.000
N4140G1X0.153Y1.124
N4150G1X0.780Y0.912
N4160G1X1.411Y0.738
N4170G1X2.045Y0.603
N4180G1X2.683Y0.507
N4190G1X3.326Y0.449
N4200G1X3.978Y0.429
N4210G1X4.813Y0.458
N4220G1X5.293Y0.503
N4230G1X6.020Y0.545Z-5.888
N4240G1X6.439Y0.596Z-5.828
N4250G1X6.917Y0.685Z-5.771
N4260G1X7.373Y0.802Z-5.730
N4270G1X7.904Y0.984Z-5.708
N4280G1X8.255Y1.133Z-5.703
N4290G1X8.621Y1.318Z-5.714
N4300G1X9.002Y1.548Z-5.745
N4310G1X9.370Y1.809Z-5.797
N4320G1X9.719Y2.098Z-5.869
N4330G1X10.091Y2.464Z-5.983
N4340G1X10.138Y2.517Z-6.000
N4350G1X10.610Y2.942
N4360G1X11.054Y3.427
N4370G1X11.418Y3.927
N4380G1X11.706Y4.443
N4390G1X11.921Y4.976
N4400G1X12.064Y5.529
N4410G1X12.136Y6.107
N4420G1X12.136Y6.616
N4430G1X12.064Y7.050
N4440G1X11.917Y7.506
N4450G1X11.689Y7.984
N4460G1X11.377Y8.485
N4470G1X11.192Y8.738
N4480G1X10.744Y9.273
N4490G1X10.213Y9.821
N4500G1X9.586Y10.390
N4510G1X7.031Y12.608
N4520G1X6.280Y13.315
N4530G1X5.694Y13.928
N4540G1X5.256Y14.472
N4550G1X5.087Y14.729
N4560G1X4.940Y14.996
N4570G1X4.815Y15.271
N4580G1X4.711Y15.554
N4590G1X4.631Y15.844
N4600G1X4.574Y16.140
N4610G1X4.540Y16.441
N4620G1X4.528Y16.751
N4630G1X4.550Y17.192
N4640G1X4.618Y17.625
N4650G1X4.730Y18.042
N4660G1X4.889Y18.442
N4670G1X5.093Y18.822
N4680G1X5.340Y19.181
N4690G1X5.533Y19.407
N4700G1X5.967Y19.782Z-5.926
N4710G1X6.382Y20.077Z-5.883
N4720G1X6.759Y20.300Z-5.854
N4730G1X7.247Y20.534Z-5.842
N4740G1X7.570Y20.660Z-5.837
N4750G1X7.999Y20.791Z-5.845
N4760G1X8.510Y20.905Z-5.872
N4770G1X8.907Y20.963Z-5.894
N4780G1X9.527Y21.007Z-5.948
N4790G1X10.106Y21.002Z-6.000
N4800G1X10.698Y20.916
N4810G1X11.105Y20.816
N4820G1X11.492Y20.687
N4830G1X11.859Y20.526
N4840G1X12.205Y20.335
N4850G1X12.528Y20.113
N4860G1X12.823Y19.863
N4870G1X13.083Y19.589
N4880G1X13.307Y19.292
N4890G1X13.492Y18.971
N4900G1X13.636Y18.630
N4910G1X13.754Y18.173
N4920G1X13.747Y17.866Z-5.908
N4930G1X13.705Y17.386Z-5.816
N4940G1X13.211Y16.915Z-5.000
N4950G1X13.705Y17.386Z-5.816
N4960G1X14.092Y16.915Z-5.000
N4970G1X13.705Y17.386Z-5.816
N4980G1X13.749Y17.924Z-5.924
N4990G1X13.754Y18.173Z-6.000
N5000G1X14.132Y20.074
N5010G1X14.790Y20.422Z-5.000
N5020G1X14.132Y20.074Z-6.000
N5030G1X13.333Y20.385
N5040G1X12.756Y20.577
N5050G1X12.203Y20.732
N5060G1X11.674Y20.852
N5070G1X11.170Y20.937
N5080G1X10.690Y20.988
N5090G1X10.106Y21.002
N5100G1X9.527Y21.007Z-5.948
N5110G1X8.842Y20.956Z-5.892
N5120G1X8.403Y20.885Z-5.862
N5130G1X7.864Y20.753Z-5.845
N5140G1X7.527Y20.644Z-5.837
N5150G1X7.115Y20.476Z-5.840
N5160G1X6.662Y20.246Z-5.863
N5170G1X6.335Y20.046Z-5.886
N5180G1X5.967Y19.782Z-5.926
N5190G1X5.533Y19.407Z-6.000
N5200G00Z3.000
N5210G00X41.234Y23.592
N5220G1Z-6.000F1000.0
N5230G1X41.291Y23.681F2000.0
N5240G1X41.721Y24.048Z-5.691
N5250G1X42.239Y24.532Z-5.251
N5260G1X42.501Y24.796Z-5.000
N5270G1X41.979Y24.283Z-5.481
N5280G1X41.463Y23.824Z-5.883
N5290G1X41.291Y23.681Z-6.000
N5300G1X40.881Y23.514
N5310G1X40.405Y23.944Z-5.000
N5320G1X40.881Y23.514Z-6.000
N5330G1X40.824Y23.320
N5340G1X40.615Y22.805
N5350G1X40.375Y22.469Z-5.897
N5360G1X40.092Y22.135Z-5.811
N5370G1X39.746Y21.798Z-5.752
N5380G1X39.477Y21.582Z-5.725
N5390G1X39.145Y21.352Z-5.740
N5400G1X38.789Y21.157Z-5.778
N5410G1X38.393Y20.974Z-5.861
N5420G1X37.824Y20.764Z-6.000
N5430G1X37.372Y20.687
N5440G1X36.725Y20.609
N5450G1X36.000Y20.550
N5460G1X35.194Y20.507
N5470G1X33.337Y20.474
N5480G1X26.871Y20.464
N5490G1X25.832Y20.392
N5500G1X24.844Y20.249
N5510G1X23.907Y20.034
N5520G1X23.456Y19.900
N5530G1X23.018Y19.749
N5540G1X22.593Y19.580
N5550G1X21.838Y19.221
N5560G1X21.361Y19.010Z-5.917
N5570G1X20.961Y18.798Z-5.857
N5580G1X20.570Y18.555Z-5.814
N5590G1X20.175Y18.263Z-5.795
N5600G1X19.814Y17.944Z-5.807
N5610G1X19.484Y17.595Z-5.851
N5620G1X19.182Y17.212Z-5.927
N5630G1X19.000Y16.940Z-6.000
N5640G1X18.752Y16.629
N5650G1X18.499Y16.279
N5660G1X18.264Y15.916
N5670G1X18.047Y15.540
N5680G1X17.846Y15.152
N5690G1X17.663Y14.750
N5700G1X17.497Y14.335
N5710G1X17.348Y13.906
N5720G1X17.135Y13.136
N5730G1X16.703Y12.594Z-5.465
N5740G1X16.356Y12.135Z-5.000
N5750G1X17.041Y13.022Z-5.890
N5760G1X17.135Y13.136Z-6.000
N5770G1X18.632Y13.834
N5780G1X19.262Y13.491Z-5.000
N5790G1X18.632Y13.834Z-6.000
N5800G1X18.593Y14.116
N5810G1X18.558Y14.730
N5820G1X18.582Y15.298
N5830G1X18.652Y15.834
N5840G1X18.771Y16.341
N5850G1X18.940Y16.819
N5860G1X19.019Y16.970Z-5.993
N5870G1X19.270Y17.330Z-5.906
N5880G1X19.552Y17.672Z-5.842
N5890G1X19.865Y17.993Z-5.805
N5900G1X20.219Y18.298Z-5.796
N5910G1X20.615Y18.585Z-5.817
N5920G1X21.047Y18.847Z-5.865
N5930G1X21.519Y19.085Z-5.938
N5940G1X21.838Y19.221Z-6.000
N5950G1X22.015Y19.276
N5960G1X22.584Y19.402
N5970G1X23.190Y19.490
N5980G1X23.834Y19.543
N5990G1X24.509Y19.560
N6000G1X28.052
N6010G2X28.618Y18.870I0.000J-0.577
N6020G1X26.231Y6.879
N6030G1X25.889Y5.505
N6040G1X25.711Y4.911
N6050G1X25.526Y4.379
N6060G1X25.335Y3.906
N6070G1X25.106Y3.446
N6080G1X24.837Y3.151Z-5.869
N6090G1X24.556Y2.883Z-5.773
N6100G1X24.265Y2.647Z-5.712
N6110G1X24.090Y2.522Z-5.701
N6120G1X23.974Y2.417Z-5.731
N6130G1X23.844Y2.260Z-5.857
N6140G1X23.763Y2.120Z-6.000
N6150G1X23.374Y1.960
N6160G1X22.983Y1.856
N6170G1X22.572Y1.795
N6180G1X22.150Y1.776
N6190G1X21.592Y1.783
N6200G1X21.304Y1.804
N6210G1X21.121Y2.437Z-5.000
N6220G1X21.304Y1.804Z-6.000
N6230G1X20.393Y0.893
N6240G1X19.053Y0.369Z-5.000
N6250G1X20.393Y0.893Z-6.000
N6260G1X27.546Y0.607
N6270G1X27.787Y0.020Z-5.000
N6280G1X27.546Y0.607Z-6.000
N6290G1X28.420Y1.537
N6300G1X29.729Y2.088Z-5.000
N6310G1X28.420Y1.537Z-6.000
N6320G1X24.323Y1.622
N6330G2X23.763Y2.120I0.012J0.577
N6340G1X23.844Y2.260Z-5.857
N6350G1X23.974Y2.417Z-5.731
N6360G1X24.090Y2.522Z-5.701
N6370G1X24.309Y2.681Z-5.719
N6380G1X24.600Y2.921Z-5.787
N6390G1X24.879Y3.194Z-5.887
N6400G1X25.106Y3.446Z-6.000
N6410G1X25.429Y3.701
N6420G1X25.823Y4.043
N6430G1X26.180Y4.386
N6440G1X26.501Y4.730
N6450G1X26.785Y5.075
N6460G1X27.034Y5.420
N6470G1X27.259Y5.784
N6480G1X27.472Y6.184
N6490G1X27.673Y6.620
N6500G1X27.862Y7.094
N6510G1X28.036Y7.604
N6520G1X28.198Y8.151
N6530G1X28.345Y8.734
N6540G1X30.420Y19.096
N6550G2X30.987Y19.560I0.566J-0.113
N6560G1X32.376
N6570G1X33.226Y19.584
N6580G1X34.043Y19.657
N6590G1X34.835Y19.777
N6600G1X35.603Y19.944
N6610G1X36.347Y20.160
N6620G1X37.067Y20.422
N6630G1X37.824Y20.764
N6640G1X38.485Y21.013Z-5.845
N6650G1X38.840Y21.183Z-5.770
N6660G1X39.195Y21.384Z-5.735
N6670G1X39.523Y21.617Z-5.727
N6680G1X39.836Y21.879Z-5.760
N6690G1X40.131Y22.178Z-5.821
N6700G1X40.444Y22.560Z-5.927
N6710G1X40.639Y22.830Z-6.000
N6720G1X41.049Y23.331
N6730G1X41.234Y23.592
N6740G00Z3.000
N6750G00Z20.000
N6760G00X0.000Y0.000
N6770M09
N6780M30
%

[mactec54]

[QUOTE=blackdoglaser;1836286]Is this what you needed?
I just tried running it again. I homed the machine perfectly to the left front then moved the cutter to the centre of my workpeice and zero'ed all the axis'. As soon as I hit start the spindle goes straight to the top and triggers the z limit switch. When I press start again it went at speed towards the left rear of the machine and would have crashed if I had not stopped it.
I can't figure out if it's an issue with the gcode or something to do with mach3 settings.[QUOTE]

Have a go with this, is your machine set up with metric or Inches, when you homed your Zaxes, did you then set the Tool height off the top of your work


%
G17G90G40G49G80G91.1
G21
G54
T1M06 (V-Bit 60 deg 25.3 mm )
N140G00G43Z20.000H1
N150S20000M03
N190X0.000Y0.000F2000.0
N200G00X-16.885Y23.592Z3.000
N210G1Z-6.000F1000.0
N220G1X-16.828Y23.681F2000.0
N230G1X-16.399Y24.048Z-5.691
N240G1X-15.880Y24.532Z-5.251
N250G1X-15.618Y24.796Z-5.000
N260G1X-16.140Y24.283Z-5.481
N270G1X-16.656Y23.824Z-5.883
N280G1X-16.828Y23.681Z-6.000
N290G1X-17.238Y23.514
N300G1X-17.714Y23.944Z-5.000
N310G1X-17.238Y23.514Z-6.000
N320G1X-17.295Y23.320
N330G1X-17.504Y22.805
N340G1X-17.744Y22.469Z-5.897
N350G1X-18.027Y22.135Z-5.811
N360G1X-18.373Y21.798Z-5.752
N370G1X-18.642Y21.582Z-5.725
N380G1X-18.975Y21.352Z-5.740
N390G1X-19.330Y21.157Z-5.778
N400G1X-19.726Y20.974Z-5.861
N410G1X-20.295Y20.764Z-6.000
N420G1X-20.748Y20.687
N430G1X-21.394Y20.609
N440G1X-22.119Y20.550
N450G1X-22.926Y20.507
N460G1X-24.782Y20.474
N470G1X-31.248Y20.464
N480G1X-32.287Y20.392
N490G1X-33.275Y20.249
N500G1X-34.213Y20.034
N510G1X-34.663Y19.900
N520G1X-35.101Y19.749
N530G1X-35.527Y19.580
N540G1X-36.282Y19.221
N550G1X-36.758Y19.010Z-5.917
N560G1X-37.158Y18.798Z-5.857
N570G1X-37.549Y18.555Z-5.814
N580G1X-37.944Y18.263Z-5.795
N590G1X-38.305Y17.944Z-5.807
N600G1X-38.635Y17.595Z-5.851
N610G1X-38.937Y17.212Z-5.927
N620G1X-39.119Y16.940Z-6.000
N630G1X-39.367Y16.629
N640G1X-39.620Y16.279
N650G1X-39.855Y15.916
N660G1X-40.073Y15.540
N670G1X-40.273Y15.152
N680G1X-40.456Y14.750
N690G1X-40.622Y14.335
N700G1X-40.771Y13.906
N710G1X-40.984Y13.136
N720G1X-41.417Y12.594Z-5.465
N730G1X-41.763Y12.135Z-5.000
N740G1X-41.078Y13.022Z-5.890
N750G1X-40.984Y13.136Z-6.000
N760G1X-39.487Y13.834
N770G1X-38.857Y13.491Z-5.000
N780G1X-39.487Y13.834Z-6.000
N790G1X-39.526Y14.116
N800G1X-39.561Y14.730
N810G1X-39.537Y15.298
N820G1X-39.467Y15.834
N830G1X-39.348Y16.341
N840G1X-39.179Y16.819
N850G1X-39.100Y16.970Z-5.993
N860G1X-38.849Y17.330Z-5.906
N870G1X-38.567Y17.672Z-5.842
N880G1X-38.254Y17.993Z-5.805
N890G1X-37.900Y18.298Z-5.796
N900G1X-37.505Y18.585Z-5.817
N910G1X-37.072Y18.847Z-5.865
N920G1X-36.600Y19.085Z-5.938
N930G1X-36.282Y19.221Z-6.000
N940G1X-36.104Y19.276
N950G1X-35.535Y19.402
N960G1X-34.929Y19.490
N970G1X-34.285Y19.543
N980G1X-33.610Y19.560
N990G1X-30.067
N1000G2X-29.501Y18.870I0.000J-0.577
N1010G1X-31.888Y6.879
N1020G1X-32.230Y5.505
N1030G1X-32.408Y4.911
N1040G1X-32.593Y4.379
N1050G1X-32.784Y3.906
N1060G1X-33.013Y3.446
N1070G1X-33.282Y3.151Z-5.869
N1080G1X-33.563Y2.883Z-5.773
N1090G1X-33.854Y2.647Z-5.712
N1100G1X-34.029Y2.522Z-5.701
N1110G1X-34.146Y2.417Z-5.731
N1120G1X-34.275Y2.260Z-5.857
N1130G1X-34.356Y2.120Z-6.000
N1140G1X-34.745Y1.960
N1150G1X-35.136Y1.856
N1160G1X-35.547Y1.795
N1170G1X-35.969Y1.776
N1180G1X-36.527Y1.783
N1190G1X-36.815Y1.804
N1200G1X-36.998Y2.437Z-5.000
N1210G1X-36.815Y1.804Z-6.000
N1220G1X-37.726Y0.893
N1230G1X-39.066Y0.369Z-5.000
N1240G1X-37.726Y0.893Z-6.000
N1250G1X-30.573Y0.607
N1260G1X-30.333Y0.020Z-5.000
N1270G1X-30.573Y0.607Z-6.000
N1280G1X-29.699Y1.537
N1290G1X-28.390Y2.088Z-5.000
N1300G1X-29.699Y1.537Z-6.000
N1310G1X-33.796Y1.622
N1320G2X-34.356Y2.120I0.012J0.577
N1330G1X-34.275Y2.260Z-5.857
N1340G1X-34.146Y2.417Z-5.731
N1350G1X-34.029Y2.522Z-5.701
N1360G1X-33.810Y2.681Z-5.719
N1370G1X-33.519Y2.921Z-5.787
N1380G1X-33.240Y3.194Z-5.887
N1390G1X-33.013Y3.446Z-6.000
N1400G1X-32.690Y3.701
N1410G1X-32.296Y4.043
N1420G1X-31.939Y4.386
N1430G1X-31.618Y4.730
N1440G1X-31.334Y5.075
N1450G1X-31.085Y5.420
N1460G1X-30.860Y5.784
N1470G1X-30.647Y6.184
N1480G1X-30.446Y6.620
N1490G1X-30.258Y7.094
N1500G1X-30.083Y7.604
N1510G1X-29.921Y8.151
N1520G1X-29.774Y8.734
N1530G1X-27.699Y19.096
N1540G2X-27.132Y19.560I0.566J-0.113
N1550G1X-25.743
N1560G1X-24.893Y19.584
N1570G1X-24.076Y19.657
N1580G1X-23.284Y19.777
N1590G1X-22.516Y19.944
N1600G1X-21.772Y20.160
N1610G1X-21.052Y20.422
N1620G1X-20.295Y20.764
N1630G1X-19.634Y21.013Z-5.845
N1640G1X-19.279Y21.183Z-5.770
N1650G1X-18.924Y21.384Z-5.735
N1660G1X-18.596Y21.617Z-5.727
N1670G1X-18.283Y21.879Z-5.760
N1680G1X-17.988Y22.178Z-5.821
N1690G1X-17.675Y22.560Z-5.927
N1700G1X-17.480Y22.830Z-6.000
N1710G1X-17.070Y23.331
N1720G1X-16.885Y23.592
N1730G00Z3.000
N1740G00X-5.187Y1.715
N1750G1Z-6.000F1000.0
N1760G1X-5.009Y1.865F2000.0
N1770G1X-4.564Y2.142Z-5.873
N1780G1X-4.172Y2.422Z-5.754
N1790G1X-3.992Y2.561Z-5.713
N1800G1X-3.614Y2.353Z-5.000
N1810G1X-3.992Y2.561Z-5.713
N1820G1X-3.749Y2.912Z-5.419
N1830G1X-3.390Y3.471Z-5.000
N1840G1X-3.760Y2.896Z-5.432
N1850G1X-3.992Y2.561Z-5.713
N1860G1X-4.200Y2.402Z-5.762
N1870G1X-4.719Y2.040Z-5.910
N1880G1X-5.009Y1.865Z-6.000
N1890G1X-5.250Y1.765
N1900G1X-5.835Y1.580
N1910G1X-6.432Y1.448
N1920G1X-7.037Y1.369
N1930G1X-7.648Y1.342
N1940G1X-9.139Y1.385
N1950G1X-15.850Y1.650
N1960G2X-16.403Y2.266I0.023J0.577
N1970G1X-16.300Y2.399Z-5.872
N1980G1X-16.135Y2.548Z-5.769
N1990G1X-15.770Y2.801Z-5.763
N2000G1X-15.478Y3.041Z-5.813
N2010G1X-15.201Y3.314Z-5.907
N2020G1X-15.007Y3.534Z-6.000
N2030G1X-14.313Y4.122
N2040G1X-13.952Y4.471
N2050G1X-13.629Y4.817
N2060G1X-13.346Y5.160
N2070G1X-13.099Y5.500
N2080G1X-12.878Y5.855
N2090G1X-12.669Y6.245
N2100G1X-12.473Y6.669
N2110G1X-12.290Y7.128
N2120G1X-12.121Y7.622
N2130G1X-11.966Y8.151
N2140G1X-11.825Y8.714
N2150G1X-11.405Y10.820
N2160G1X-10.963Y11.274
N2170G1X-10.838Y11.248Z-5.932
N2180G1X-10.629Y11.227Z-5.896
N2190G1X-10.121Y11.227Z-5.896
N2200G1X-9.398Y11.214Z-5.919
N2210G1X-8.271Y11.167Z-6.000
N2220G1X-6.033Y10.913
N2230G1X-5.822Y10.305Z-5.000
N2240G1X-6.033Y10.913Z-6.000
N2250G1X-5.781Y11.167
N2260G1X-4.396Y11.744Z-5.000
N2270G1X-5.781Y11.167Z-6.000
N2280G1X-8.271
N2290G1X-9.421Y11.214Z-5.918
N2300G1X-10.140Y11.227Z-5.896
N2310G1X-10.629
N2320G1X-10.838Y11.248Z-5.932
N2330G1X-10.963Y11.274Z-6.000
N2340G1X-11.195Y11.855
N2350G1X-9.574Y20.128
N2360G1X-9.367Y20.469
N2370G1X-9.264Y20.500Z-5.947
N2380G1X-9.008Y20.533Z-5.895
N2390G1X-7.009Y20.520Z-5.919
N2400G1X-5.692Y20.480Z-5.989
N2410G1X-5.136Y20.426Z-6.000
N2420G1X-4.631Y20.350
N2430G1X-4.182Y20.257
N2440G1X-3.786Y20.146
N2450G1X-3.432Y20.008
N2460G1X-3.110Y19.836
N2470G1X-2.822Y19.626
N2480G1X-2.575Y19.377
N2490G1X-2.377Y19.089
N2500G1X-2.236Y18.770
N2510G1X-2.153Y18.430
N2520G1X-2.147Y18.352
N2530G1X-2.185Y18.043Z-5.902
N2540G1X-2.275Y17.558Z-5.799
N2550G1X-2.817Y17.096Z-5.000
N2560G1X-2.275Y17.558Z-5.799
N2570G1X-1.937Y17.096Z-5.000
N2580G1X-2.275Y17.558Z-5.799
N2590G1X-2.175Y18.114Z-5.922
N2600G1X-2.147Y18.352Z-6.000
N2610G1X-1.480Y20.474
N2620G1X-0.693Y21.051Z-5.000
N2630G1X-1.480Y20.474Z-6.000
N2640G1X-5.577
N2650G1X-6.335Y20.504Z-5.947
N2660G1X-7.025Y20.521Z-5.918
N2670G1X-9.013Y20.533Z-5.895
N2680G1X-9.264Y20.500Z-5.947
N2690G1X-9.367Y20.469Z-6.000
N2700G1X-10.299Y20.443
N2710G1X-11.495Y20.358
N2720G1X-11.707Y20.415Z-5.865
N2730G1X-11.930Y20.425Z-5.805
N2740G1X-12.821Y20.344Z-5.740
N2750G1X-13.395Y20.261Z-5.710
N2760G1X-14.027Y20.131Z-5.697
N2770G1X-14.664Y19.957Z-5.710
N2780G1X-15.275Y19.743Z-5.747
N2790G1X-15.882Y19.477Z-5.813
N2800G1X-16.424Y19.183Z-5.889
N2810G1X-16.964Y18.828Z-5.990
N2820G1X-17.046Y18.775Z-6.000
N2830G1X-17.403Y18.547
N2840G1X-17.737Y18.305
N2850G1X-18.052Y18.048
N2860G1X-18.347Y17.775
N2870G1X-18.622Y17.487
N2880G1X-18.879Y17.184
N2890G1X-19.117Y16.864
N2900G1X-19.336Y16.528
N2910G1X-19.537Y16.175
N2920G1X-19.720Y15.806
N2930G1X-19.884Y15.419
N2940G1X-20.030Y15.014
N2950G1X-20.158Y14.591
N2960G1X-20.266Y14.150
N2970G1X-20.345Y13.749
N2980G1X-20.714Y13.249Z-5.499
N2990G1X-21.054Y12.764Z-5.000
N3000G1X-20.386Y13.696Z-5.948
N3010G1X-20.345Y13.749Z-6.000
N3020G1X-18.918Y14.441
N3030G1X-18.343Y14.078Z-5.000
N3040G1X-18.918Y14.441Z-6.000
N3050G1X-18.890Y15.047
N3060G1X-18.800Y15.675
N3070G1X-18.644Y16.290
N3080G1X-18.428Y16.870
N3090G1X-18.148Y17.417
N3100G1X-17.807Y17.932
N3110G1X-17.401Y18.416
N3120G1X-17.001Y18.801
N3130G1X-16.379Y19.209Z-5.883
N3140G1X-15.819Y19.507Z-5.803
N3150G1X-15.236Y19.758Z-5.744
N3160G1X-14.628Y19.969Z-5.708
N3170G1X-13.944Y20.150Z-5.700
N3180G1X-13.329Y20.272Z-5.710
N3190G1X-12.632Y20.367Z-5.746
N3200G1X-11.930Y20.425Z-5.805
N3210G1X-11.707Y20.415Z-5.865
N3220G1X-11.495Y20.358Z-6.000
N3230G1X-11.348Y19.848
N3240G1X-14.045Y6.357
N3250G1X-14.206Y5.690
N3260G1X-14.376Y5.085
N3270G1X-14.556Y4.541
N3280G1X-14.746Y4.056
N3290G1X-15.007Y3.534
N3300G1X-15.247Y3.267Z-5.888
N3310G1X-15.562Y2.968Z-5.797
N3320G1X-15.823Y2.762Z-5.759
N3330G1X-16.135Y2.548Z-5.769
N3340G1X-16.300Y2.399Z-5.872
N3350G1X-16.403Y2.266Z-6.000
N3360G1X-16.814Y2.117
N3370G1X-17.253Y2.008
N3380G1X-17.725Y1.932
N3390G1X-18.232Y1.887
N3400G1X-18.773Y1.873
N3410G1X-19.013Y2.450Z-5.000
N3420G1X-18.773Y1.873Z-6.000
N3430G1X-19.748Y0.892
N3440G1X-21.082Y0.369Z-5.000
N3450G1X-19.748Y0.892Z-6.000
N3460G1X-8.892Y0.443
N3470G1X-8.034Y0.438
N3480G1X-7.558Y0.505
N3490G1X-7.064Y0.642
N3500G1X-6.551Y0.853
N3510G1X-6.019Y1.139
N3520G1X-5.751Y1.308
N3530G1X-5.187Y1.715
N3540G00Z3.000
N3550G00X5.533Y19.407
N3560G1Z-6.000F1000.0
N3570G1X5.094Y19.028F2000.0
N3580G1X4.649Y18.571
N3590G1X4.272Y18.098
N3600G1X3.961Y17.611
N3610G1X3.714Y17.107
N3620G1X3.529Y16.584
N3630G1X3.406Y16.041
N3640G1X3.344Y15.474
N3650G1X3.344Y14.892
N3660G1X3.401Y14.372
N3670G1X3.511Y13.931
N3680G1X3.668Y13.565
N3690G1X3.894Y13.229
N3700G1X4.080Y13.007
N3710G1X4.633Y12.424
N3720G1X5.401Y11.691
N3730G1X8.359Y9.055
N3740G1X8.915Y8.537
N3750G1X9.407Y8.019
N3760G1X9.829Y7.505
N3770G1X10.182Y6.992
N3780G1X10.459Y6.487
N3790G1X10.669Y5.963
N3800G1X10.797Y5.444
N3810G1X10.830Y5.184
N3820G1X10.841Y4.924
N3830G1X10.819Y4.454
N3840G1X10.754Y3.999
N3850G1X10.644Y3.562
N3860G1X10.489Y3.144
N3870G1X10.289Y2.747
N3880G1X10.138Y2.517
N3890G1X9.826Y2.198Z-5.902
N3900G1X9.538Y1.945Z-5.834
N3910G1X9.237Y1.711Z-5.781
N3920G1X8.922Y1.497Z-5.740
N3930G1X8.585Y1.298Z-5.712
N3940G1X8.187Y1.101Z-5.700
N3950G1X7.772Y0.933Z-5.707
N3960G1X7.337Y0.791Z-5.732
N3970G1X6.797Y0.660Z-5.787
N3980G1X6.402Y0.590Z-5.833
N3990G1X5.904Y0.533Z-5.902
N4000G1X5.293Y0.503Z-6.000
N4010G1X4.809Y0.555
N4020G1X4.079Y0.696
N4030G1X3.357Y0.906
N4040G1X2.644Y1.184
N4050G1X2.286Y1.352
N4060G1X1.594Y1.729
N4070G1X0.907Y2.175
N4080G1X0.650Y2.369
N4090G1X0.593Y3.136Z-5.000
N4100G1X0.650Y2.369Z-6.000
N4110G1X-0.364Y1.333
N4120G1X-1.350Y1.152Z-5.000
N4130G1X-0.364Y1.333Z-6.000
N4140G1X0.153Y1.124
N4150G1X0.780Y0.912
N4160G1X1.411Y0.738
N4170G1X2.045Y0.603
N4180G1X2.683Y0.507
N4190G1X3.326Y0.449
N4200G1X3.978Y0.429
N4210G1X4.813Y0.458
N4220G1X5.293Y0.503
N4230G1X6.020Y0.545Z-5.888
N4240G1X6.439Y0.596Z-5.828
N4250G1X6.917Y0.685Z-5.771
N4260G1X7.373Y0.802Z-5.730
N4270G1X7.904Y0.984Z-5.708
N4280G1X8.255Y1.133Z-5.703
N4290G1X8.621Y1.318Z-5.714
N4300G1X9.002Y1.548Z-5.745
N4310G1X9.370Y1.809Z-5.797
N4320G1X9.719Y2.098Z-5.869
N4330G1X10.091Y2.464Z-5.983
N4340G1X10.138Y2.517Z-6.000
N4350G1X10.610Y2.942
N4360G1X11.054Y3.427
N4370G1X11.418Y3.927
N4380G1X11.706Y4.443
N4390G1X11.921Y4.976
N4400G1X12.064Y5.529
N4410G1X12.136Y6.107
N4420G1X12.136Y6.616
N4430G1X12.064Y7.050
N4440G1X11.917Y7.506
N4450G1X11.689Y7.984
N4460G1X11.377Y8.485
N4470G1X11.192Y8.738
N4480G1X10.744Y9.273
N4490G1X10.213Y9.821
N4500G1X9.586Y10.390
N4510G1X7.031Y12.608
N4520G1X6.280Y13.315
N4530G1X5.694Y13.928
N4540G1X5.256Y14.472
N4550G1X5.087Y14.729
N4560G1X4.940Y14.996
N4570G1X4.815Y15.271
N4580G1X4.711Y15.554
N4590G1X4.631Y15.844
N4600G1X4.574Y16.140
N4610G1X4.540Y16.441
N4620G1X4.528Y16.751
N4630G1X4.550Y17.192
N4640G1X4.618Y17.625
N4650G1X4.730Y18.042
N4660G1X4.889Y18.442
N4670G1X5.093Y18.822
N4680G1X5.340Y19.181
N4690G1X5.533Y19.407
N4700G1X5.967Y19.782Z-5.926
N4710G1X6.382Y20.077Z-5.883
N4720G1X6.759Y20.300Z-5.854
N4730G1X7.247Y20.534Z-5.842
N4740G1X7.570Y20.660Z-5.837
N4750G1X7.999Y20.791Z-5.845
N4760G1X8.510Y20.905Z-5.872
N4770G1X8.907Y20.963Z-5.894
N4780G1X9.527Y21.007Z-5.948
N4790G1X10.106Y21.002Z-6.000
N4800G1X10.698Y20.916
N4810G1X11.105Y20.816
N4820G1X11.492Y20.687
N4830G1X11.859Y20.526
N4840G1X12.205Y20.335
N4850G1X12.528Y20.113
N4860G1X12.823Y19.863
N4870G1X13.083Y19.589
N4880G1X13.307Y19.292
N4890G1X13.492Y18.971
N4900G1X13.636Y18.630
N4910G1X13.754Y18.173
N4920G1X13.747Y17.866Z-5.908
N4930G1X13.705Y17.386Z-5.816
N4940G1X13.211Y16.915Z-5.000
N4950G1X13.705Y17.386Z-5.816
N4960G1X14.092Y16.915Z-5.000
N4970G1X13.705Y17.386Z-5.816
N4980G1X13.749Y17.924Z-5.924
N4990G1X13.754Y18.173Z-6.000
N5000G1X14.132Y20.074
N5010G1X14.790Y20.422Z-5.000
N5020G1X14.132Y20.074Z-6.000
N5030G1X13.333Y20.385
N5040G1X12.756Y20.577
N5050G1X12.203Y20.732
N5060G1X11.674Y20.852
N5070G1X11.170Y20.937
N5080G1X10.690Y20.988
N5090G1X10.106Y21.002
N5100G1X9.527Y21.007Z-5.948
N5110G1X8.842Y20.956Z-5.892
N5120G1X8.403Y20.885Z-5.862
N5130G1X7.864Y20.753Z-5.845
N5140G1X7.527Y20.644Z-5.837
N5150G1X7.115Y20.476Z-5.840
N5160G1X6.662Y20.246Z-5.863
N5170G1X6.335Y20.046Z-5.886
N5180G1X5.967Y19.782Z-5.926
N5190G1X5.533Y19.407Z-6.000
N5200G00Z3.000
N5210G00X41.234Y23.592
N5220G1Z-6.000F1000.0
N5230G1X41.291Y23.681F2000.0
N5240G1X41.721Y24.048Z-5.691
N5250G1X42.239Y24.532Z-5.251
N5260G1X42.501Y24.796Z-5.000
N5270G1X41.979Y24.283Z-5.481
N5280G1X41.463Y23.824Z-5.883
N5290G1X41.291Y23.681Z-6.000
N5300G1X40.881Y23.514
N5310G1X40.405Y23.944Z-5.000
N5320G1X40.881Y23.514Z-6.000
N5330G1X40.824Y23.320
N5340G1X40.615Y22.805
N5350G1X40.375Y22.469Z-5.897
N5360G1X40.092Y22.135Z-5.811
N5370G1X39.746Y21.798Z-5.752
N5380G1X39.477Y21.582Z-5.725
N5390G1X39.145Y21.352Z-5.740
N5400G1X38.789Y21.157Z-5.778
N5410G1X38.393Y20.974Z-5.861
N5420G1X37.824Y20.764Z-6.000
N5430G1X37.372Y20.687
N5440G1X36.725Y20.609
N5450G1X36.000Y20.550
N5460G1X35.194Y20.507
N5470G1X33.337Y20.474
N5480G1X26.871Y20.464
N5490G1X25.832Y20.392
N5500G1X24.844Y20.249
N5510G1X23.907Y20.034
N5520G1X23.456Y19.900
N5530G1X23.018Y19.749
N5540G1X22.593Y19.580
N5550G1X21.838Y19.221
N5560G1X21.361Y19.010Z-5.917
N5570G1X20.961Y18.798Z-5.857
N5580G1X20.570Y18.555Z-5.814
N5590G1X20.175Y18.263Z-5.795
N5600G1X19.814Y17.944Z-5.807
N5610G1X19.484Y17.595Z-5.851
N5620G1X19.182Y17.212Z-5.927
N5630G1X19.000Y16.940Z-6.000
N5640G1X18.752Y16.629
N5650G1X18.499Y16.279
N5660G1X18.264Y15.916
N5670G1X18.047Y15.540
N5680G1X17.846Y15.152
N5690G1X17.663Y14.750
N5700G1X17.497Y14.335
N5710G1X17.348Y13.906
N5720G1X17.135Y13.136
N5730G1X16.703Y12.594Z-5.465
N5740G1X16.356Y12.135Z-5.000
N5750G1X17.041Y13.022Z-5.890
N5760G1X17.135Y13.136Z-6.000
N5770G1X18.632Y13.834
N5780G1X19.262Y13.491Z-5.000
N5790G1X18.632Y13.834Z-6.000
N5800G1X18.593Y14.116
N5810G1X18.558Y14.730
N5820G1X18.582Y15.298
N5830G1X18.652Y15.834
N5840G1X18.771Y16.341
N5850G1X18.940Y16.819
N5860G1X19.019Y16.970Z-5.993
N5870G1X19.270Y17.330Z-5.906
N5880G1X19.552Y17.672Z-5.842
N5890G1X19.865Y17.993Z-5.805
N5900G1X20.219Y18.298Z-5.796
N5910G1X20.615Y18.585Z-5.817
N5920G1X21.047Y18.847Z-5.865
N5930G1X21.519Y19.085Z-5.938
N5940G1X21.838Y19.221Z-6.000
N5950G1X22.015Y19.276
N5960G1X22.584Y19.402
N5970G1X23.190Y19.490
N5980G1X23.834Y19.543
N5990G1X24.509Y19.560
N6000G1X28.052
N6010G2X28.618Y18.870I0.000J-0.577
N6020G1X26.231Y6.879
N6030G1X25.889Y5.505
N6040G1X25.711Y4.911
N6050G1X25.526Y4.379
N6060G1X25.335Y3.906
N6070G1X25.106Y3.446
N6080G1X24.837Y3.151Z-5.869
N6090G1X24.556Y2.883Z-5.773
N6100G1X24.265Y2.647Z-5.712
N6110G1X24.090Y2.522Z-5.701
N6120G1X23.974Y2.417Z-5.731
N6130G1X23.844Y2.260Z-5.857
N6140G1X23.763Y2.120Z-6.000
N6150G1X23.374Y1.960
N6160G1X22.983Y1.856
N6170G1X22.572Y1.795
N6180G1X22.150Y1.776
N6190G1X21.592Y1.783
N6200G1X21.304Y1.804
N6210G1X21.121Y2.437Z-5.000
N6220G1X21.304Y1.804Z-6.000
N6230G1X20.393Y0.893
N6240G1X19.053Y0.369Z-5.000
N6250G1X20.393Y0.893Z-6.000
N6260G1X27.546Y0.607
N6270G1X27.787Y0.020Z-5.000
N6280G1X27.546Y0.607Z-6.000
N6290G1X28.420Y1.537
N6300G1X29.729Y2.088Z-5.000
N6310G1X28.420Y1.537Z-6.000
N6320G1X24.323Y1.622
N6330G2X23.763Y2.120I0.012J0.577
N6340G1X23.844Y2.260Z-5.857
N6350G1X23.974Y2.417Z-5.731
N6360G1X24.090Y2.522Z-5.701
N6370G1X24.309Y2.681Z-5.719
N6380G1X24.600Y2.921Z-5.787
N6390G1X24.879Y3.194Z-5.887
N6400G1X25.106Y3.446Z-6.000
N6410G1X25.429Y3.701
N6420G1X25.823Y4.043
N6430G1X26.180Y4.386
N6440G1X26.501Y4.730
N6450G1X26.785Y5.075
N6460G1X27.034Y5.420
N6470G1X27.259Y5.784
N6480G1X27.472Y6.184
N6490G1X27.673Y6.620
N6500G1X27.862Y7.094
N6510G1X28.036Y7.604
N6520G1X28.198Y8.151
N6530G1X28.345Y8.734
N6540G1X30.420Y19.096
N6550G2X30.987Y19.560I0.566J-0.113
N6560G1X32.376
N6570G1X33.226Y19.584
N6580G1X34.043Y19.657
N6590G1X34.835Y19.777
N6600G1X35.603Y19.944
N6610G1X36.347Y20.160
N6620G1X37.067Y20.422
N6630G1X37.824Y20.764
N6640G1X38.485Y21.013Z-5.845
N6650G1X38.840Y21.183Z-5.770
N6660G1X39.195Y21.384Z-5.735
N6670G1X39.523Y21.617Z-5.727
N6680G1X39.836Y21.879Z-5.760
N6690G1X40.131Y22.178Z-5.821
N6700G1X40.444Y22.560Z-5.927
N6710G1X40.639Y22.830Z-6.000
N6720G1X41.049Y23.331
N6730G1X41.234Y23.592
N6740G00Z3.000
N6750G00Z20.000
N6760G00X0.000Y0.000
N6770M09
N6780M30
%

[ger21]

This is probably sending the Z axis up:
N140G00G43Z20.000H1

As for speeding to the left rear, that's where your g-code is telling it go. X - 40

Your issues are with Aspire. Mach3 is doing exactly what the g-code is telling it to do.

[Jon.N.CNC]

Unit miss match or incorrect steps per possibly? Out of curiosity why do you have origin at center of part?

Something else up though if your limit switches are being overridden or not registering.

[blackdoglaser]

Machine is set up in mm. Yes I set tool height at zero just touching the material.