All,
I have an intermittent alarm from a spindle on a Kasper Lathe with a Fanuc 18iT controller.
7147 POS Coder alarm Fanuc 18IT
I can not find much in the alarms page and will look on the Fanuc site also.
All,
I have an intermittent alarm from a spindle on a Kasper Lathe with a Fanuc 18iT controller.
7147 POS Coder alarm Fanuc 18IT
I can not find much in the alarms page and will look on the Fanuc site also.
Any other alarms on the message screen right before that one?
I would start by ringing out the cable.
If that passes muster, you may need Fanuc to come in with various components to try.