[kmcwhq]

I have 2 Kryle VMC 500B machining centers.

Both machines have had their parameters 'messed with' then deleted.

I have a 'Generic' parameter list from a Kryle parameter manual, but it is not machine specific.
I also am not familiar with the startup and operation of these machines, or the start up procedures. I was told they need to be homed first.

The tool changer carousel is a "4th axis" and has a small Fanuc red cap servo driving the tool carousel.
However, when I move the tool carrousel slightly, the atc axis alarms out. The axis tuning or drive tuning parameters are not correct.
XY&Z axes do jog however.

Kryle does not have the machine specific parameters, but does have a 'data sheet' for one of the machines.
They want a fee to 'attempt' to recreate the parameter list.

I am looking for any Kryle VMC 500B owners with a machine near the same year as mine (shown below) that may be able to copy their parameter list for me.


Machine A:
Ser No K30757
CNC MFG No 0024588
Build Date Oct 1990

Machine B:
Ser No K30765
CNC MFG No 0024594
Build Date Nov 1990

Thank you for any help on this problem....

dk

[Zoner]

Hi dk,

Did you have any success with your machines?

Still trying to find our problem with the VMC700 toolchanger, we don't have a proper Kryle diagnose params manual, only some extracts.

[kmcwhq]

Email sent........

[soogand]

SOOGAND

[Veke72]

Are you still there? I need help too.