VOTING TIMEThanks to all those who submitted an entry into the Gecko drive banner design competition. The moderators had a tough time selecting who would make it through. All the entries were fantastic.
If you didnt make it through to the finals you still have a chance to design a sticker for Gecko Drive. HERE
A special mention to Mariss from Gecko Drive for putting up the prizes, and also to Art from Mach2/3 for donating a licence to the winner also.
Here is your chance to pick one of the Gecko drive finalists to win the competition.
The voting is at the top of this page
<html><head><meta http-equiv="Content-Type" content="text/html; charset=windows-1252"><title>New Page 3</title></head><body topmargin="0" leftmargin="0"><p><iframe name="I1" src="http://216.194.80.14/gecko.htm" scrolling="no" border="0" frameborder="0" width="557" height="1722">
Your browser does not support inline frames or is currently configured not to display inline frames.</iframe></p></body></html>
View Poll Results: The power is yours. Who should win this competition.
- Voters
- 405. You may not vote on this poll
-
Deviant
90 22.22% -
Cyclone
84 20.74% -
Bluefly
32 7.90% -
Thegoodtech
46 11.36% -
Javadog
68 16.79% -
Barkster
85 20.99%
Results 1 to 20 of 32
-
03-03-2005, 12:20 PM #1
Community Moderator
- Join Date
- Feb 2004
- Posts
- 2337
Gecko Drive, Banner Competition, Finalists Voting
Being outside the square !!!
-
03-03-2005, 04:23 PM #2
Community Moderator
- Join Date
- Mar 2003
- Posts
- 6855
The poll will close and winners will be announced on Saturday. The 1st place winner banner, will be used for Geckos advertisement on the site as well. I'm very impress by what our members are capable of, the last place winner will also receive a CNCzone hat.
-
03-03-2005, 05:53 PM #3
Registered
- Join Date
- May 2004
- Posts
- 4
Go Barkster! Nice animation, nice metaphor. The fade-in distracted initially; it took me a while to notice that the fades were different products. Note that I did stick around to find out, a significant point. In any case, utility trumps aesthetics here, so I'd probably not change it if it were mine. And I wish I could claim a piece of work like this as mine.
Congratulations! Regardless the outcome, it's the best!
-
03-03-2005, 06:12 PM #4
Registered
- Join Date
- Mar 2004
- Posts
- 847
This is intense!! I don't think i'm going to have any fingernails left by tomorrow!
-
03-03-2005, 07:49 PM #5
Registered
- Join Date
- Sep 2004
- Posts
- 412
Poor fingernails...
I knew I should have animated a strip dancing gecko in my ad.
(grins)
-
03-03-2005, 10:02 PM #6
Registered
- Join Date
- Dec 2003
- Posts
- 9
Bluefly Nice!... simple!.... good message!.....congratulations on a good job!
-
03-04-2005, 01:34 AM #7
Registered
- Join Date
- Mar 2005
- Posts
- 1
I'd enter, but I couldn't figure out how to draw a stick figure gecko. JavaDog has my vote instead.
-
03-04-2005, 02:30 AM #8
Registered
- Join Date
- Mar 2003
- Posts
- 779
Yes, I tell you it was very hard to pick only six from all the great entries.
Nice job displaying them Benny, I like seeing them all lined up!Thanks
Jeff Davis (HomeCNC)
http://www.homecnc.info
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
-
03-04-2005, 03:09 AM #9
Gold Member
- Join Date
- Oct 2003
- Posts
- 927
Yup.. Barkster's has all the elements I want to see in the banner!
-
03-04-2005, 03:10 AM #10
Registered
- Join Date
- Feb 2005
- Posts
- 69
Bluefly, I like it, rock solid, excellent work!!
-
03-04-2005, 03:27 AM #11
Community Moderator
- Join Date
- Feb 2004
- Posts
- 2337
Well since everyone is giving thier opinion, and the competition is now out of my hands and in the hands of the public, I will give my vote to Deviant. It has a nice sci-fi, apocalyptic feel about it.
Not too in ya face, but still highly noticable. Attention to detail, original thinking, Outside the square, Just enough to make you wonder what it is, and click on the banner.Being outside the square !!!
-
03-04-2005, 05:23 AM #12
Registered
- Join Date
- Sep 2004
- Posts
- 412
Originally Posted by ynneb
awww shucks... *blushes*
Now all I gotta do is figure out how to post mark my first born to Benny. Should make a good chip sweeper, worst case maybe a coolant squirter.
*grins*
-
03-04-2005, 05:23 AM #13
Community Moderator
- Join Date
- Feb 2004
- Posts
- 2337
Watching this poll is just like a slow motion horse race. Who will cross the line b4 the vote ends?
-
03-04-2005, 05:39 AM #14
Registered
- Join Date
- Mar 2003
- Posts
- 779
go Barkster!!!!
Thanks
Jeff Davis (HomeCNC)
http://www.homecnc.info
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
-
03-04-2005, 06:06 AM #15
Community Moderator
- Join Date
- Feb 2004
- Posts
- 2337
Too bad barkster, gecko has just anounced a price change.
Go Deviant !!!!
Carefull that barkster doesnt bite your butt......woof woof
-
03-04-2005, 01:02 PM #16
Registered
- Join Date
- Mar 2004
- Posts
- 847
...and that's the end of that. Good game everyone. :cheers:
-
03-04-2005, 02:50 PM #17
Registered
- Join Date
- Sep 2004
- Posts
- 5
Deviant is my vote
-
03-04-2005, 03:18 PM #18
Gold Member
- Join Date
- Jun 2003
- Posts
- 1365
I voted for Barkster, I like what his ad says, "A step above the rest" it also looks very professional.
Jon
-
03-04-2005, 03:23 PM #19
Community Moderator
- Join Date
- Mar 2003
- Posts
- 6855
I'll post the winner at midnight est.
-
03-04-2005, 05:09 PM #20
Registered
- Join Date
- Nov 2004
- Posts
- 389
All excellent. Great work....
Javadog gets my vote. I want to see his machine up and running !
Seriously, very hard to choose. Good luck to all.
Similar Threads
-
Gecko Drive controller box schematics!
By happytriger2000 in forum Gecko DrivesReplies: 19Last Post: 09-11-2006, 01:36 PM -
Newbie questions gecko drive limit ?
By Calico in forum Gecko DrivesReplies: 0Last Post: 04-03-2005, 11:15 AM -
Gecko Drive sticker competition is now here
By ynneb in forum Gecko DrivesReplies: 64Last Post: 03-15-2005, 06:02 AM -
Software for gecko banner?
By CRFultz in forum Community Club HouseReplies: 8Last Post: 02-21-2005, 07:29 PM -
Servos or Steppers..... and other gecko related questions
By UKRobotics in forum Gecko DrivesReplies: 11Last Post: 04-19-2004, 08:14 PM
Posting Permissions
