Today I keep on getting an alarm 235 spindle Z fault if I put my rpms above 5000 on my mini mill. I have another encoder belt that I am going to put on now but was wondering if anyone has some info on changing it? how do you make sure that it is oriented correct? If that’s not the problem next replace the cable or is there something else that I am missing?
Thanks.
Results 1 to 3 of 3
-
08-06-2009, 06:27 PM #1
Registered
- Join Date
- Apr 2005
- Posts
- 105
Alarm 235 spindle Z fault, encoder belt?
-
08-10-2009, 09:28 PM #2
Registered
- Join Date
- Apr 2005
- Posts
- 105
Put a new encoder belt on this morning, got the spindle oriented and it ran fine for about 5 hours now it back getting alarm 235. Is it the encoder or something else? anyone else have alarm 235???
-
08-17-2009, 07:54 PM #3
Registered
- Join Date
- Sep 2006
- Posts
- 48
Probably the spindle encoder. Unless you have a methods for checking one or know someone who can your best bet is to try and replace it. Before you do, inspect the cable and connectors carefully.
Loose Nut
Reply With QuoteSimilar Threads
-
VF3 spindle high gear fault alarm #117 help!
By JHR1 in forum Haas MillsReplies: 14Last Post: 01-01-2010, 05:39 PM -
spindle encoder belt
By RICKG in forum FanucReplies: 2Last Post: 10-23-2007, 12:14 AM -
Alarm 123 Spindle Drive Fault
By Shotout in forum Haas MillsReplies: 11Last Post: 05-27-2007, 05:48 PM -
Alarm 235 Spindle Z Fault
By Gomes in forum Haas MillsReplies: 1Last Post: 04-27-2007, 05:26 PM -
Alarm 408 Spindle Serial Link Start Fault
By boricuajdm in forum FanucReplies: 1Last Post: 04-23-2007, 06:26 PM
Posting Permissions
