Hey guys, I'm new to this forum, and to lathing in general. I purchased a 7x10 mini lathe from harbor freight. Well after milling, and stopping the spin by going too deep with a cut, the motor stopped. popped a fuse. luckily there was a spare, but even with that it will not work? It clicks. If is move the clear cover that hangs over the chuck I hear a relay click.
Any info on how to make this work, if did I damage something??
If I did, where can I send it to?
Thanks in advance.
-FPM
Results 1 to 3 of 3
-
06-20-2009, 04:03 AM #1
Registered
- Join Date
- Jun 2009
- Posts
- 10
harbor freight 7x10,fuse blown,not working
-
06-20-2009, 05:47 AM #2
Registered
- Join Date
- Jun 2009
- Posts
- 10
wow. some how I kept missing with that bar that holds the plastic cover and it worked!
-Fpm:banana:
-
06-21-2009, 12:06 AM #3
Member
- Join Date
- May 2009
- Posts
- 141
I did the same thing when I first bought my lathe! I didn't put the chuck cover on and the machine wouldn't work. I almost brought it back to the store, but finally found the safety switch.
Glad to hear you found the problem!
Dale P.
Reply With QuoteSimilar Threads
-
fanuc spindle fuse on dc link blown
By Nastyzen in forum FanucReplies: 5Last Post: 02-02-2023, 05:25 PM -
DRO for Harbor Freight 47158 based on Harbor Freight 93293 Calipers
By Temtu in forum Benchtop MachinesReplies: 20Last Post: 05-27-2009, 04:29 AM -
Fanuc Power Supply Internal Fuse Blown
By hrhoward in forum FanucReplies: 1Last Post: 01-07-2009, 10:42 PM -
0.6 amp fuse blown
By highspeedmazak in forum Tormach Personal CNC MillReplies: 2Last Post: 09-05-2008, 05:11 PM -
harbor freight X2 is now $579?
By isaac338 in forum Benchtop MachinesReplies: 30Last Post: 05-13-2008, 12:09 PM
Posting Permissions
