Gidday guys I have a problem with our Mazak 620 T32 ,when was running ok of Friday it was shut down over the weekend and Monday morning it would not boot up? When the on button is pressed the lights flash on and off again.
Does anybody know is this could be a fault with the PD21B-X power supply and if so how to test it????
Any ideas would be appreciated
Thread: Mazak won't boot up
Results 1 to 3 of 3
-
03-30-2009, 06:36 AM #1
Registered
- Join Date
- Jan 2008
- Posts
- 3
Mazak won't boot up
-
03-31-2009, 06:39 AM #2
Registered
- Join Date
- Jun 2007
- Posts
- 149
Check the 3 sodium fuses or circuit breakers.
Sounds like a phase is out.
Check the memory battery has charge.
Look for swollen capacitors in power supply.
Careful, 3 phase will fry you like a chicken! (isolate power!!!!)
-
03-31-2009, 10:13 AM #3
Registered
- Join Date
- Jan 2008
- Posts
- 3
Gidday Elmafud, yes we check for a phase down,power supply seems ok it looks like a faulty IC on one of the cards next to the power supply.We'll try repairing it and see if we're lucky.Thanks for the reply.
Reply With QuoteSimilar Threads
-
boot problem
By claucampan in forum FanucReplies: 2Last Post: 08-14-2008, 07:33 AM -
VF4 WONT BOOT
By jimzin15754 in forum Haas MillsReplies: 3Last Post: 06-03-2008, 11:23 PM -
Mazak QT-200,Mazak VTC-160A,Mazak FJV-250 all pcb problem
By sting_dot in forum Mazak, Mitsubishi, MazatrolReplies: 0Last Post: 05-22-2007, 02:20 AM -
MB1 won't boot
By daveelc in forum HURCOReplies: 1Last Post: 04-20-2007, 02:32 AM -
2006 TM-1 won't boot up!
By Edster in forum Haas MillsReplies: 12Last Post: 12-07-2006, 02:12 AM
Posting Permissions
