[supertronic]

Hi,

I want to buy a bigger laser system.

I found DC-G350D-50W system on http://www.lcshenhui.com/eng/



The laser system looks fine including red dot pointer, laser power driven by software, 500 x 300mm working area, air assist, water cooling, USB port DSP system, Autocad and Corel Draw support.

Somebody can say me something about the quality of the machine.

Best Regards
Michael

[Falconace]

Hello! I own a Shenhui DC-G350D, 50w and 50x30 working plan.

The machine seem really good to me.
I use it for engrave and cut different materials.

Acrylic up to 10mm, the same for wood.

The laser seem fast and good, even if for my toughts the software Sh_Laser Cut 4.3 should be a little better.

(now i am buying from them the 9060 series with 100watt and 90x60, or the step more, working plan)

I think the only thing that right now the shenhui laser miss is the autofocus on the laser, but this is not a big problem for me.
For any question, don't hesitate do ask

[DaveDoesIT]

I think the only thing that right now the shenhui laser miss is the autofocus on the laser, but this is not a big problem for me.

Be careful what you wish for. A LOT of guys with auto-focus disable it as the touch probe gets in the way of stuff. Ask anyone with auto-focus and see if they have never crashed into the touch rod.

Dave

[vivinar]

hi,also don't forget to see our website.also have good quality laser machines.
Shenhui is located in Shangdong province
And our company is in Guangzhou,China.
Any friend who want to buy laser cutting machine from Guangzhou,can consider about ours.

www.vivinar.diytrade.com

[Ronaldus]

Hi, I would like to share my experince with you, if is not too late, please write to me [email protected]

[lngczr]

hy i will be the new baby whith an laser shenhui 350 i hope i will be an lucky one i expect the machine on september bocca lupo ))))))))

[Rodney Gold]

I have bought 2 large lasers from Shenui recently a 1280 80w reci tube and a 960 60w normal tube , both work very well and I have had a great sales experience and excellent tech support from them , went to go visit their factory for 2 days in May , it's impressive...
I have reported on my trip to china as well as my experience with the lasers here
Despatches from China
and
Chinese lasers - they're here !!!!!!

[vivinar]

hi,everybody,nice to see you.
I also doing laser engraving and cutting machine.
please check our website,all of our products have CE certificate with high quality.
??????
??????

Any after-service also can ask me, i will help you.(group)