I need a copy of the PLC off a Bridgeport Interact TNC151B machine. So if anyone has a copy or a machine where they can download the PLC it would really help me out.
Thanks
I need a copy of the PLC off a Bridgeport Interact TNC151B machine. So if anyone has a copy or a machine where they can download the PLC it would really help me out.
Thanks
I do not know if that is possible.
If you know how, please post the procedure so it can be done for you.
George
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
It can be done as Handsie points out,but it also depends on a parameter whether the control looks at the plc programme on the eprom that Heidenhain burnt according to the MTB specs or whether it uses the generic plc programme issued with the control.The generic programme can be edited or rewritten by the user.Heidenhain`s website has a very good manual on writing the plc programmes for these controls.FOC for download.Obviously if you don`t know what you are doing it would be better to leave well alone.