Hi all
Have been running a old bmc40 for the 2 years with no problem but all of a sudden keep getting syntax error problems.This is usually quite away into the program about 7 or 8 hours.

The last error stopped on the line
N57950X85.491Y-53.102100
So i checked the program and the line actually read as below
N57950X85.491Y-53.102Z93.100

It seamed to have missed out Z93.

Has anybody got any ideas what the problem is as this happens on every
program i now send via dnc
I still use the same machining program and post processor

Thankyou
Neal