We have a Bridgeport Romi Lathe that has a speed problem. When programmed for a certain speed it runs about 10-15% slower than program. We have changed the encoder and checked for belt slippage. We can get it a little closer by changing the setting on the motor controller. I am of the opinion that the controller needs to be replaced . Anyone out there had a problem like this?Thanks D.
Results 1 to 3 of 3
-
12-01-2008, 07:30 PM #1
Registered
- Join Date
- Apr 2005
- Posts
- 57
Bridgeport/Romi Speed fluctuation
Another Day in Paradise
-
12-02-2008, 05:51 AM #2
Registered
- Join Date
- Dec 2008
- Posts
- 1
Hello- I am a newb to CNC machinery. I hope to learn more. I wonder if
your service voltages and line draws of the motor are in specification.
Regards, Dan
-
12-02-2008, 06:18 AM #3
Moderator
- Join Date
- Nov 2004
- Posts
- 3028
There is a "gain" parameter for the spindle speed. I have to be in front of the machine to find it. But it is around parameter 71 I think.
Go to DOS, type in PFM.exe enter, cursor down to the parameter editor. cursor to the parameter needed, edit and save.
George(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Reply With QuoteSimilar Threads
-
Romi-Bridgeport PowerPath 15 users?
By RedGTZ in forum Bridgeport / Hardinge MillsReplies: 49Last Post: 04-10-2023, 08:22 PM -
Bridgeport Romi Collet Closer
By Clark in forum Bridgeport / Hardinge MillsReplies: 0Last Post: 11-01-2008, 02:04 AM -
Bridgeport/Romi Speed fluctuation
By Riverside192 in forum DNC Problems and SolutionsReplies: 0Last Post: 10-13-2008, 06:38 PM -
Bridgeport Romi Lathe
By zdude in forum Bridgeport / Hardinge MillsReplies: 6Last Post: 09-23-2008, 01:38 PM -
Bridgeport Romi Password
By md63825 in forum Bridgeport / Hardinge MillsReplies: 9Last Post: 08-16-2007, 11:53 PM
Posting Permissions
