Is it possible on Fanuc 0M to send program to control without push on input and send (take) program from control to PC without typing on machine "O####, Output start"...?
Is it possible on Fanuc 0M to send program to control without push on input and send (take) program from control to PC without typing on machine "O####, Output start"...?
Sorry for bad english
I've never seen or heard of a way. There is a way to be at the machine and send or receive prog's without ever having to be at the PC.
At Dolphin we have ported our Communications software to run on
handheld PDA's which support Windows platform. The PDA is connected
to the PC via a Synchronised docking station, CNC upload/download is
required the PDA is taken to the CNC and connected via a USB/RS232
converter. Details available on www.dolphin.gb.com .
Dolphin CAD CAM Ltd
Predator DNC uses a Remote Request to initiate program transfer from the NC. The operator never has to go near the PC. Also, when the operator wants to save the program from the CNC, he/she just PUNCHes the program.
PUNCHING
Is it possible that every program that is punched will be saved in it's own file and under same name as program number is?
READ (INPUT)
Is there any explanation how remote request works, and what features there are?
Is it possible that I push INPUT button just one and I send few programs (in single file or multiple files?) at a time, with one INPUT? This is not related to remote request. This is for Fanuc 0M
Sorry for bad english
Yes, I found these parameters.
If I have all program without % at begining and at end of programs, first program that is sent is lost, not recognized.
If I have all programs with % at begining of it, transfer is terminated at begining of 2nd program (because of %).
SO, solution is that first program does have % at begining, others not.
Also if I put % at the end of last program that is sent, transfer will be terminated automaticaly. Otherwise I have to hit Reset button to stop transfer.
Since now I had all my programs and subprograms in this shape, in single files:
%
:1234
*
*
*
M30 or M99
%
Is there any solution for this?
Sorry for bad english
Predator can strip the % from the programs when it sends them. It also can add a % at the beginning and end of the "conversation". So even if your programs look like your example, when Predator sends them, it looks like this:
%
:1234(MAIN PROGRAM)
*
*
*
M30
:1235(SUB 1)
*
*
*
M99
:1236(SUB 2)
*
*
M99
%
Perfect!
So Predator does have all features that I have been dreaming about.
I asked for access code for timed evaluation of Predator (with NIC number) but no answer for a very long time. Why?
Sorry for bad english
Hey guys!! New to the site. Was wondering if anybody knew where to get a free copy of the fanuc ez guide software for a lathe to run on a laptop. I´ve recently moved country and just started a job and this software would be a great help to me for programming becuse all the machines here are in spanish and my spanish is not that good yet. Cmobilaah