We have a Mori Seki SL400 and have acquired a steady for it. It does come with location to lock the turret into it for moving, however nothing is noted in the manual for this procedure.
Any help I can recieve with this would be appreciated. Dragging it around by hand is a real pain.
Cheers
Daniel
Thread: Mori steadyrest
Results 1 to 3 of 3
-
09-04-2008, 06:31 PM #1
Registered
- Join Date
- Sep 2008
- Posts
- 4
Mori steadyrest
-
09-09-2008, 08:26 PM #2
Registered
- Join Date
- Nov 2006
- Posts
- 38
1st Question: Does the turret have the pin that should extend to engage the steady rest?
2nd Question: What model and manufacturer of steady rest did you buy?
-
09-10-2008, 06:00 PM #3
Registered
- Join Date
- Sep 2008
- Posts
- 4
Q1,Yes, the turret has the engagement pin. Used frequently for the tailstock.
Q2, The steady is a Mori Seiki steady with the receiver for the turret pin.
we have engaged it manually before, however I would like to know if there is a way for it to auto engage similarly to the tailstock. If so, how.
Cheers
Reply With QuoteSimilar Threads
-
MORI
By Mori in forum G-Code ProgramingReplies: 7Last Post: 07-07-2008, 06:16 PM -
Mori or Hitachi
By Paul in OK in forum Mori Seiki lathesReplies: 1Last Post: 03-12-2008, 08:00 PM -
Mori NX Posts
By murrietafx4 in forum Mori Seiki lathesReplies: 0Last Post: 02-26-2008, 06:05 PM -
Mori w/10T
By grease in forum FanucReplies: 2Last Post: 10-26-2007, 11:10 PM
Posting Permissions
