[WayneT]

I recently purchased a used Weldon CNC OD grinder with a Fanuc 0G-B control. I was able to obtain a programming manual, but can't locate a basic control manual. I am currently only able to program in MDI mode as I can't figure out how to load a program from memory or create a new one. I suspect that a parameter is set in the control to prevent access as this machine was from a production environment. I would really appreciate any information that anyone has on this control.


Thanks!!

[fanuservicetech]

Manual for 0GB control is B60154E. This manual contains operator's, maintenance, and connection information. Please contact fanuc america 1888-326-8287 to check availability. If you are interested in getting replacement keysheet, here's how to locate the part number.
http://www.kfasllc.com/Membrane_keysheets.htm

It's a good idea to replace the keysheet to prevent keyboard failure. You can order it from Fanuc America.

[WayneT]

THANKS!!