hey all, I was wondering if anyone knew where to get a straddle style holder for my swiss machine, but in an 8mm shank. everything i've found is 12 or above. I talked to genevieve swiss to see if it'd be possible to grind down one of their 1/2" holders, but it's not possible.
anyone know of anywhere else??
thanks!!
Results 1 to 3 of 3
-
05-08-2008, 07:06 PM #1
Registered
- Join Date
- Aug 2007
- Posts
- 105
8 mm or 3/8" shank straddle knurls??
-
05-09-2008, 11:10 AM #2
Registered
- Join Date
- Feb 2008
- Posts
- 267
You could...
If this is for a gang tools position, you could drill and tap a 12MM holder and bolt an 8MM adapter ... that you would have to make.
If this is a turret position, you could mill out the holder pocket to accept the 12MM shank.
Good luck!
-
05-09-2008, 11:10 PM #3
Registered
- Join Date
- Feb 2008
- Posts
- 586
Call AccuTrak. They should be able to help you, adapt a holder for your needs.
Reply With QuoteSimilar Threads
-
1/2 Shank End Mill
By duhtrev in forum CNC ToolingReplies: 6Last Post: 08-04-2008, 09:27 PM -
Drawing a threaded shank
By wdp67 in forum BobCad-CamReplies: 5Last Post: 10-18-2007, 02:16 AM -
Tapmatic shank change
By ozzie34231 in forum Metalworking- / Woodworking Tooling / Manual MachiningReplies: 3Last Post: 04-25-2007, 06:52 PM -
Tapered shank drills sharpened
By Rockwell in forum Hobby DiscussionReplies: 0Last Post: 04-19-2007, 02:44 AM -
Flycutter shank style
By thackman in forum Benchtop MachinesReplies: 1Last Post: 03-07-2007, 06:41 AM
Posting Permissions
