[lukasw]

Hello
i need your help
Do you have table of G and M codes for swiss lathe with Meldas 60S please ?
I need for part belt start and stop. Other code are welcome.
Thank you very much.

[Species8472]

MELDAS 60/60S Series programing manual
https://drive.google.com/file/d/1F_k...ew?usp=sharing

[lukasw]

hi, thank you for G code, have you any idea, where is Mcode ?

[Species8472]

I thumbed though that manual I did not see a list for m-codes. It should work with the common codes but there are also custom mcodes. Those you would need to get from the machine builder.

What do mean by "part belt start and stop"?

[lukasw]

HI,
thank you for your response. Yes, i need know code for "workpiece conveyor" workpiece belt, Belt,
Control codes for operating the conveyor belt to remove workpieces from the machine.
Im sorry, im not sure, how this say english.

Machine is swiss type lathe POLYGIM CLS32 brand and type.

thank you for your help

[Species8472]

HI,
thank you for your response. Yes, i need know code for "workpiece conveyor" workpiece belt, Belt,
Control codes for operating the conveyor belt to remove workpieces from the machine.
Im sorry, im not sure, how this say english.

Machine is swiss type lathe POLYGIM CLS32 brand and type.

thank you for your help

"workpiece conveyor" = "part conveyer"

Page 139

Not sure this manual is for your exact machine but these mcodes may work.

https://drive.google.com/file/d/1TSB...usp=drive_link

[lukasw]

HI,thank you very much, work fine. great thank