Originally Posted by
Outwiped
sorry if i am incorrect speaking
emotions
1. I have found that 60s models do not start if the mitsubishi cassette is ejected. Why I do not eject it to make a copy - I am not sure I am able to copy or I have required devices.
2. Still rs-232 connection seems the only method to get ALL1 and other files - so far I cannot connect, either no signal or errors. The M60s manual says that rs-232 file transfers are possible if switches on the back side of Mitsu are in position 1. Is that right - I do not know. Seems strange if I transfer working programs via rs-232 every time I need open the box and work there with a screwdriver. Or that info is only about ALL1, ALL2,ALL3 files transfer? One machinist said never touch that rotary switch if I do not have a service cassette.
3. So now I am here: the machine can work milling according to programs, ethernet is off, rs-232 is not set, E51 error says I need to format the NC memory but I am afraid to destroy all software including backup. And, the manual posted here says "upload ALL1 parameters before formatting and do not agree to load default parameters". And I do not have the ALL1 and other backup files on the external carriers.