Re: Servo Control for Haas Barfeeder
Ser-Err (Servo Error) during first home find initiation.
Ser-Err (Servo Error) upon indexing.
Possible causes:
1- Faulty main cable or cable connector.
2- Table driving a heavy load.
3- Table is jammed.
4- Check Parameter 25.
5- Head is iammed
Solution:
1- Check cable and motor fuse.
2- Reduce workload weight and/or feed rates.
3- Eliminate obstruction.
4- Must be set to 8 for HRT 160, 210, 450 (19 for HRT 310)
5- Eliminate obstruction
http://cncmakers.com/cnc/controllers/CNC_Controller_System/CNC_Retrofit_Package.html