I'm occasionally getting ripples in tight radius corners as you can see in the attached photo. Not sure what is causing this so thought I'd seek some help here.

I'm using a Flashforge 5M Pro. PLA filament (cheaper brand to be honest as these items use a LOT of filament). 6 mm tip at 225 F. Other settings in the attached 2nd image.

Thanks,
BH



Click image for larger version.  Name: screenshot.jpg  Views: 0  Size: 35.7 KB  ID: 505122

Click image for larger version.  Name: screenshot2.jpg  Views: 0  Size: 82.2 KB  ID: 505126