Hi,
Can you share your custom metric tool library, RhinoCAM's library doesn't actually have real metric tools, if I am not wrong? The ones available are mostly imerial tools converted to mm (there is no 6.35 and 19.05 mm standard drill bits).
Hi,
Can you share your custom metric tool library, RhinoCAM's library doesn't actually have real metric tools, if I am not wrong? The ones available are mostly imerial tools converted to mm (there is no 6.35 and 19.05 mm standard drill bits).
You know it's really easy to make your own library, right? It's probably easier than getting someone else's library then having to carefully edit it to suit your inventory of tools, tool number assignments, etc.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
It is easyer if you have elementary knowledge on subject, and in case that you're not using tools from Aliexpress (I plan to use Chinese metric mills etc). Chinese production don't have precise description usually, so one have to make up lenght of flutes, necks and similar stuff used to build a tool in RhinoCAM. As well I have not s clue about standard dimensions of metrics mills if there is a such.
If you have the tools,it isn't a huge job to measure them and model the result.It gets a little more complicated if you don't have a tool length sensor and need every detail correct for collision avoidance software.
Not exactly, just a metric library with the most common tools that I can use for simple programming. Exotic, or missing tools I can add myself later.
I just don't have much experience with tools, so I spent too much time figuring out which tool could be used for certain operations.
As well it affects programming, because, without knowing about existing/standard tools, I have to guess can a model be milled if I use some weird radii, dimensions or so.
Its a few years since I used RhinoCAM so I might be wrong but I have a feeling that there may be a tutorial included that would help you.Failing that,look on youtube for guidance as there is a good possibility of something being there.
I can share one of my metric libraries, but unless I'm just not seeing it, I don't see how to upload anything other than an image to this forum.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Thanks, you can upload it here https://easyupload.io/ so the others can download it as well if they want.