please, i search infos on G140 141 13 14 P M100
hello i recently hit into a okuma with 2 spindles, 2 turrets, and i managed so far to use the upper turret to cut on spindle 1, then on spindle 2, while lower turret was stationary
program is:
G13
G140
do something
G141
do something else
M02
i wish to continue with lower turret, not syncrnous wiht upper, but simply after the upper finishes, so i tried these :
G13
G140
do something
G141
do something else
G14 --- here it starts to error
M02
thus i can not activate lower turret and continue, at least not inside that program
so i made another, simpler :
Code:
G13
G140
G00 Z+10 G91
Z-10
G90
()
G14
G141
G00 Z+10 G91
Z-10
G90
M02
but here, upper and lower move simultaneously, not 1st upper, then lower
i guess that being dual spindle dual turret, then it has some modes which go simulatenous by default, and i believe that it looks through the program, and where it sees
13 140 is one side, and then 14 141 is another, and it starts to act simultaneous.
So what are the modes, that by default, trigger simulatenous ? are they driven by 13 14 or 140 141, or 13 140 and 14 141, thus what are the codes combinations that trigger an independent machine mode ?
How to add P into above program, and make it behave no more simulatenous, but lower to execute after upper ?
Please, i don't know exactly what to ask, but i need help / kindly
Ladyhawke - My Delirium, https://www.youtube.com/watch?v=X_bFO1SNRZg