586,766 active members*
8,459 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > FeatureCAM CAD/CAM > Autodesk FeatureCam Haas st-20y turn/mill post needed.

Thread: Autodesk FeatureCam Haas st-20y turn/mill post needed.

Results 1 to 2 of 2
  1. 08-24-2017, 04:10 PM #1
    jbrehm88
    jbrehm88 is offline Registered
    Join Date
    Aug 2017
    Posts
    5

    Autodesk FeatureCam Haas st-20y turn/mill post needed.

    Have a recently purchased Haas st-20y that we need a post for. Currently running Autodesk FeatureCam 2018. If anyone has a generic one for a 10Y or 30Y I should be able to make modifications from it. Thanks in advance.
    Reply With Quote Reply With Quote
  2. 05-07-2024, 01:32 PM #2
    AvgMachinistJoe
    AvgMachinistJoe is offline
    Join Date
    Jul 2023
    Posts
    1

    Re: Autodesk FeatureCam Haas st-20y turn/mill post needed.

    Quote Originally Posted by jbrehm88 View Post
    Have a recently purchased Haas st-20y that we need a post for. Currently running Autodesk FeatureCam 2018. If anyone has a generic one for a 10Y or 30Y I should be able to make modifications from it. Thanks in advance.
    I'm also looking for a Post for FeatureCam / HAAS ST20Y ST25Y. Any Luck finding a post?
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Autodesk FeatureCam Haas st-20y turn/mill post needed.
    By jbrehm88 in forum Autodesk Post Processors
    Replies: 0
    Last Post: 08-24-2017, 04:09 PM
  2. Featurecam turn mill post
    By perfectscore001 in forum FeatureCAM CAD/CAM
    Replies: 4
    Last Post: 11-06-2016, 12:41 AM
  3. featurecam mill/turn elliptical hole.
    By perfectscore001 in forum FeatureCAM CAD/CAM
    Replies: 0
    Last Post: 10-28-2016, 10:48 AM
  4. BobCAD Post Processor for HAAS Mill Turn Machines
    By aldepoalo in forum Haas Lathes
    Replies: 0
    Last Post: 06-07-2016, 04:03 PM
  5. FeatureCAM Fanuc 18i Turn mill post
    By Plippy12 in forum FeatureCAM CAD/CAM
    Replies: 2
    Last Post: 11-10-2013, 03:21 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules