586,452 active members*
3,262 visitors online*
Register for free
Login
IndustryArena Forum > CNC Electronics > Servo Motors / Drives > info on Hansen servo motors

Thread: info on Hansen servo motors

Results 1 to 2 of 2
  1. 11-07-2007, 10:03 AM #1
    curtis
    curtis is offline Registered
    Join Date
    May 2007
    Posts
    16

    info on Hansen servo motors

    I have two hansen servo motors.

    I request data on these such as torque, power limits etc. I would be grateful if anyone could infrom me of the specs on these motors.

    Numbers on motors are...

    18158-01
    121-33224-1

    Thank you
    Reply With Quote Reply With Quote
  2. 11-07-2007, 09:11 PM #2
    curtis
    curtis is offline Registered
    Join Date
    May 2007
    Posts
    16
    found it ..

    voltage 24
    stall torue 74 oz
    stall current 11.25 A
    no load max .430 A
    no load speed 4320 - 5280
    load torque 13 oz
    load curent 1.9-206A
    load speed 3620-4420
    rem reisist 1.7-2.7 Ohm
    term induct 1.91 MH
    armature inertia 3.0x10*-3
    impedance 9C/watt
    back emf 4.005.4 v/krpm
    torque constant 5.4-7.3in.oz/A
    friction torque max 2.5 oz
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. stepper motors or servo motors?
    By jprobst in forum Torchmate
    Replies: 3
    Last Post: 07-13-2007, 11:37 PM
  2. where can I get info about motors?
    By joe aiello in forum CNC Machine Related Electronics
    Replies: 1
    Last Post: 05-13-2007, 03:16 AM
  3. Info on Spindle motors
    By shadybacon in forum Community Club House
    Replies: 7
    Last Post: 12-27-2005, 11:21 PM
  4. need info on sigma stepper motors
    By gv71 in forum Stepper Motors / Drives
    Replies: 1
    Last Post: 06-26-2004, 07:25 AM
  5. I Need Info On 5 Phase Stepper Motors.
    By ljoe1969 in forum DIY CNC Router Table Machines
    Replies: 1
    Last Post: 01-25-2004, 01:34 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules