I have a backup for a 15-MA control. The parameters, offsets and programs are in a normal format that I can read. The ladder backup (PMC-NA) is in a hex format as I expected. The backup of the PMC data (timers, counters, keep and data) is also in a hex format. I've never seen this before for the PMC settings. Then again, this is a very old control. Short of loading the file back into the machine, is there a way to convert this to an ascii format that I can read? I just need to verify some settings and don't want to overwrite the tool registry.
Results 1 to 4 of 4
-
08-23-2023, 01:20 PM #1
Registered
- Join Date
- Apr 2009
- Posts
- 108
15-MA PMC backup in hex conversion available?
-
08-23-2023, 08:12 PM #2
Registered
- Join Date
- Apr 2009
- Posts
- 108
Re: 15-MA PMC backup in hex conversion available?
No luck in finding a conversion. I backed up the machine as it sits now and loaded the old backup. Working now.
-
08-26-2023, 03:01 PM #3
Registered
- Join Date
- Oct 2014
- Posts
- 137
Re: 15-MA PMC backup in hex conversion available?
This file have Motorola S19 format.It can converted to BIN/HEX or other...
-
08-26-2023, 04:32 PM #4
Registered
- Join Date
- Oct 2014
- Posts
- 137
Re: 15-MA PMC backup in hex conversion available?
The examples of your file in some formats...
Reply With QuoteSimilar Threads
-
Fanuc 0T-B PMC-L backup
By Diri19 in forum FanucReplies: 5Last Post: 04-24-2022, 08:29 PM -
PMC backup of FANUC 15MB
By jeff.liu in forum FanucReplies: 11Last Post: 09-08-2020, 02:59 AM -
18i pmc parameter backup
By Oovos in forum FanucReplies: 1Last Post: 03-10-2019, 03:57 AM -
PMC Ladder backup on 16MA
By figeacaero in forum FanucReplies: 8Last Post: 12-27-2018, 12:32 PM -
Programming Ladder PMC on 0T need hex file converter
By dpionk in forum FanucReplies: 3Last Post: 05-22-2012, 11:03 PM
Tags for this Thread
Posting Permissions
