Hi
I have problem in TNC 151. Machine axis goes to reference point normal but after reference it vibrates heavy and gross positioning error.
Any kind of help appreciate.
M. Shabbir Mughal
Hi
I have problem in TNC 151. Machine axis goes to reference point normal but after reference it vibrates heavy and gross positioning error.
Any kind of help appreciate.
M. Shabbir Mughal
Probably tach needs adjusting
what machine is it on with which servo drives?
You response makes no sense
No one can help if you do no give information
SO repeat yourself without answering the questions asked
What machine and what servo amps
When homing the control just puts out a set voltage to move the axis in a direction. It does not close the positioning loop until it hits the trip dog for the axis position. Your machine cannot control the position loop, tach adjustment, gain adjustment,
Start by answering the questions
Also, has this machine run for you before,?
Did you lose the parameters?
I realize both the posters here that English is not your first language
But
What machine?
This is minimum information
If you cannot communicate, take pictures
Parameters are the only thing that tells the control how to run, whether it is a toaster or a color TV or a vertical mill. They are not optional, the machine cannot run at all without the correct parameters