586,655 active members*
2,854 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > Read data from/On CNC Machine Fanuc Controller

Thread: Read data from/On CNC Machine Fanuc Controller

Results 1 to 3 of 3
  1. 08-26-2019, 02:04 PM #1
    typhoonn
    typhoonn is offline
    Join Date
    Aug 2019
    Posts
    1

    Read data from/On CNC Machine Fanuc Controller

    Hello,

    I would like to collect the data from a CNC machine which has equipped with FANUC 31i and FANUC 0i-d control unit. (for example; “running” , “stopped” , “standby” , “alarm” etc...) I have an IP address from the machine and I can ping to machine. But I could not find a way to get the data from the machine. May I ask you to help me about this problem?

    Thank you for help.
    Reply With Quote Reply With Quote
  2. 08-26-2019, 02:13 PM #2
    Mecanix
    Mecanix is offline
    Join Date
    Aug 2019
    Posts
    339

    Re: Read data from/On CNC Machine Fanuc Controller

    Depending whether your plc advertise the OPC protocol, or if you have the license for it, you can use any OPC-UA Client to read/write data to and from pretty much any industrial controls and bots.
    Kepware is one that comes to mind, there are several others clients also (free, open source, etc). I bet FANUC has one also? have you checked?
    Reply With Quote Reply With Quote
  3. 08-26-2019, 02:22 PM #3
    Mecanix
    Mecanix is offline
    Join Date
    Aug 2019
    Posts
    339

    Re: Read data from/On CNC Machine Fanuc Controller

    What is this?
    https://github.com/TrakHound/Fanuc-MTConnect-Agent
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Collect data from old FANUC controller (RS-232)
    By jitbasemartin in forum Fanuc
    Replies: 15
    Last Post: 05-11-2023, 10:11 AM
  2. Read and Write data from/on CNC Machine Controller
    By paraujo in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 8
    Last Post: 08-19-2018, 07:20 PM
  3. Access machine data from Host PC ( 840D controller)
    By raghav2984 in forum Deckel, Maho, Aciera, Abene Mills
    Replies: 0
    Last Post: 01-16-2018, 04:54 AM
  4. Read data from a TRAUB TX-8
    By bacar in forum Uncategorised MetalWorking Machines
    Replies: 1
    Last Post: 08-25-2017, 08:46 AM
  5. Fanuc 30i Data-server read
    By Paulus_M in forum Fanuc
    Replies: 3
    Last Post: 06-04-2012, 06:48 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules