Lets see the first lines of Gcode.
Results 1 to 13 of 13
Hybrid View
-
11-22-2018, 11:38 PM #1
Gold Member
- Join Date
- Jun 2004
- Posts
- 6618
Re: CNCRP4848Pro Exceeding Z Travel Limits...or at least trying to...
Lee
-
11-22-2018, 11:56 PM #2
Registered
- Join Date
- May 2018
- Posts
- 21
Re: CNCRP4848Pro Exceeding Z Travel Limits...or at least trying to...
You are on to something. See below.
( Router Base )
( File created: Thursday November 22 2018 - 02:48 PM)
( for CNC Roter Parts Machines )
( Material Size )
( X= 190.500, Y= 190.500, Z= 12.319)
()
(Toolpaths used in this file
(Pocket 3)
I went back into Vcarve and my job size is in inches...... 7.5 x 7.5, which is 190.5 x 190.5. My runs on Monday were in mm, but no changes were made to any of the configs in Mach 3. Is it possible that Vcarve is still outputting in mm even though all indications are inches?
Reply With QuoteSimilar Threads
-
Fanuc 18-MB Travel Limits
By Mech-Tech Jon in forum FanucReplies: 1Last Post: 11-13-2014, 01:48 AM -
Setting up Config >Homing/Limits Dialog (Motor Home/Soft Limits)
By CStevens6 in forum Mach Software (ArtSoft software)Replies: 9Last Post: 07-18-2013, 04:19 AM -
Software travel limits?
By 2xEngineer in forum Haas MillsReplies: 5Last Post: 04-15-2011, 04:34 PM -
Deckel DMC 60 T G7 Travel Limits
By mikefitz in forum Deckel, Maho, Aciera, Abene MillsReplies: 1Last Post: 05-25-2010, 07:30 PM -
Kondia/Dynapath 10M Travel Limits Problem
By ballchain in forum CNC (Mill / Lathe) Control Software (NC)Replies: 11Last Post: 05-08-2008, 12:41 AM
Tags for this Thread
Posting Permissions
