I made a Matsuura 500 retrofit with G-100 and G 320. Finally it works good, fast and powerfull, but when had been passed some time the machine lose the cero piece on Z.
I tried change the speed in the motor configuration, but it still the same.
Can somebody know what is happening and how can help me with some tips to try for fix it?
Results 1 to 2 of 2
-
04-14-2007, 03:28 AM #1
Registered
- Join Date
- Apr 2007
- Posts
- 16
Retrofit Matsuura With G-rex And G320
-
04-14-2007, 05:02 AM #2
Moderator
- Join Date
- Jan 2006
- Posts
- 4396
You can get Yasnac Control information at this site http://www.yaskawa.com/site/Support....ntrollers.html
You can also download the Manuals
Cheers!!!!!!!!Toby D.
"Imagination and Memory are but one thing, but for divers considerations have divers names"
Schwarzwald
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
www.refractotech.com
Reply With Quote
Similar Threads
-
Matsuura MC-500V Tool Changer Problem
By nlh in forum Uncategorised MetalWorking MachinesReplies: 26Last Post: 09-02-2015, 05:50 AM -
g320 question
By h_2_o in forum Gecko DrivesReplies: 4Last Post: 11-21-2006, 06:15 PM -
Matsuura Horizontal Help Needed
By cruizer67 in forum Uncategorised MetalWorking MachinesReplies: 3Last Post: 10-20-2006, 06:10 PM -
Controller With G320
By kkilst in forum Gecko DrivesReplies: 1Last Post: 05-10-2006, 02:07 PM
Posting Permissions
