[haasab]

Hello

wiring electrical Renishaw OMI

do I buy for my haas vf2ss year 2007. I have I/O boards with plug P77.

Omi 2H have …. Ø7.5 mm (0.29 in), 13-core screened cable,
Omi 2T have …. Ø5.8 mm (0.23 in), 6-core screened cable,

so 13 core or 6 core.

Renishaw OMI-2T Machine Tool Combined Optical Interface 8M New In Box wIth Warranty - Metrology Parts

[haasab]

how to tie up probe on haas connector p77

my omi t2 hahe 13 wires , connector p77 have 10 wiers

[sciguy12321]

how to tie up probe on haas connector p77

my omi t2 hahe 13 wires , connector p77 have 10 wiers

Here is a nice cheat sheet on how the wires interface

[psrp]

Here is a nice cheat sheet on how the wires interface

This is the most helpful information I've found on wiring in an OMMI-2T.

Is is possible to post or send higher resolution pictures as can't read them.

Also, why are two SSR's wired into the one 2H equivalent?

Have you found the OMI-2T works on your machine and what year is yours. Mine is an 07VF2 with P77 connector on I/O board and suits the 33-0615 cable according to the board's serial number.

Thank you.