discuss ArtCam pro software here!
discuss ArtCam pro software here!
Oh Yes! I am trying to learn this software right now. I have found that I can't seem to get some of the shapes to come out the way I want them to with the tools available in ArtCam. Is there any fluent users out there?
Thanks
Jeff Davis (HomeCNC)
http://www.homecnc.info
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
The mod of this section is a Pro at using ArtCam software.
Just drooled over every single video on that site.
Dare I ask how much?
Worry about success, failure takes care of itself.
I believe about $7500.
Gerry
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
If you are interested in training on ArtCAM to design jewelry, I'm available.
Best regards,
Ernie
www.cadcamforjewelry.com
hi
i work with Artcam but i am not profissional
please help me about
please say me wich software accept vector and giv me 3d model (.V3M)?????????
if may send yor answer to my email
Hi people.
I at last have got the mini cnc and I'm going to find out how to use it.
for the beginning could you please answer my rather silly question :
Can artcam pro produce the G code for mach3?
thanks
yes it does
Gary
Beckwith Decor Products
Beckwith Decor Products
ArtCam Reseller/Trainer, Custom tooling & Onsrud Dealer
Thank you
I'll ask other questions later I think. I was surprised when I realized how big knowledge should I gather (Mach,Mach G- and M-code language ,artcam,the machine itself and so on)
thanks
no problem,
when saving your toolpath out of ArtCam you will use the Mach3gb_arc_ Inches or the Mach3gb_arc_MM post processor to output your g-code
Gary
Beckwith Decor Products
Beckwith Decor Products
ArtCam Reseller/Trainer, Custom tooling & Onsrud Dealer
HI my name is Harry, and i am a newbie in cnc etc.
I have my new cnc milling machine from china a tonsen 3040, working with mach3.
Now i have this problem:
When mach 3 starts with a gcode program my usb ports stops working, and mach 3 hangs.
I have to reset the computer because nothing is responding.
I have the standard settings for the parallelport set in mach 3 (378,8,1,9600)
When i dont use the usb ports mach 3 is working perfect no problem at all.
But then no keyboard. If i have only the mouse connected then it will work but now and then mach3 stops and looks to reset the home positions. Then it works from the new setting, and the project is gone.
What could be the problem here?
Motherboard Asus p4p 1024mb mem 160 gb HD.
If anyone can help me, please.
Thanks Harry
I fix the problem. Put my mouse and keyboard (both usb) to the ps2 port on my computer.
Now the working. Had some converters ps2 to usb.
Hi sir, how r u
We are the one of the artcam trainer if u want to learn this software we r ready to teach u by teamviewer . the fees is 30,000 indian money, if u have interest please contact us. 91 9952262307 name : prathap
sorry master,, where can I download links for ArtCAM software pro full version.
I want to learn the program. Can help me.
Beware!
ART CAM which is a product of DELCAM is a licensed software. Teaching seperately without the concurrence of DELCAM is an offence.
Hope Mr. Pratap Subramani understands.