Trying to mill a pocket with Bobcad. Using a anilam 1100m post processor. I've got the drawing complete for the pocket. But the problem is the toolpath keeps exceeding the actual pocket dimensions. It seems that it's not taking the tool size into account when it computes. It's running the tool path directly on the line rather than the inside. I guess an easy way to trick it into working would be to offset the lines inward by half the diameter of the tool, but there's got to be something I'm missing in bobcad. Any suggestions would be greatly appreciated. Or if someone has something for a 80% AR lower pocket milling, that'd solve the goal, but not the problem.