[iGAK]

These items were created with the Novakon/Bodor Laser Cutter/Engraver.

The APS logo was created using 3/4" cast acrylic.

The inlaid plaque was created using 1/4" solid walnut.

The sphere was created using 7/64" acrylic. It required 154 individual pieces to complete. Two of the pieces are shown in the fourth photo.

[MichaelHenry]

Those all look impressive, especially the sphere. Is that your own design?

[iGAK]

I found the sphere files at:

Sphere60 eiffel style by Crab - Thingiverse

[MichaelHenry]

Thanks for the link!

[iGAK]

More items were created with the Novakon/Bodor Laser Cutter/Engraver.

The Eiffil Tower and Star Wars Tie fighter were created using 2.7mm Plywood.

[ram48]

I am doing some different things then iGAK I find it absolutely amazing what these machines are capable of Here are two pictures of a silhouette of a friends Granddaughter. It was done from a cell phone photo sent to me in a text. Editing was done in Corel draw x6 and then into RDworks to ready for burning. RDworks is included with the Novakon Bodor laser and is a pretty powerful program compared to others that came with most imported lasers.
The one on the left is mat board that was cut out and the one on the right is Cedar that was bitmap engraves (scanned)
for scale the largest bead on the necklace is .10 and the smallest is .04 in diameter on the wood profile the girl is 4 inches tall
Burned on my Novakon Bodor BCL1006 CO2 laser.